Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

Original compact design and long-term production know-how. System reliability and overall competitiveness.

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.

Outposts solutions allow you to extend and run native AWS services on premises, and is available in a variety of form factors, from 1U and 2U Outposts servers to 42U Outposts racks, and multiple rack deployments. With AWS Outposts, you can run some AWS services locally and connect to a broad range of services available in the local AWS Region. Run applications and workloads on premises using familiar AWS services, tools, and APIs. Outposts supports workloads and devices requiring low latency access to on-premises systems, local data processing, data residency, and application migration with local system interdependencies.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

Frequency signal generator for precise target detection High-frequency resolution design and frequency conversion function using DDS method Main performance Frequency: L-Band ~ Ku-Band Accurate Chirp and Pulse Mode Output Level: +0dBm min Spurious: -40dBc min Harmonic: -50dBc min Phase Noise: High Performance Frequency Sensibility: 50ppm max Port isolation: 50dBc Min Applicable fields Guided weapon tower system and radar system can be applied

Vehicle-type RF Jammer Systems provide protection to VIPs and convoys against remote-controlled explosives. These systems create a protective shield through RF broadcasting and neutralize threats activated by radio, mobile phones and wireless remote-controlled devices. Vehicle-type RF Jammer Systems can be easily integrated aboard all kinds of vehicles, and allows for reprogramming against changing situations. Continuous broadband operation Control from hand terminal Module selection Malfunction warning VSWR warning

VERSAWAVE HIGHLIGHTS: -Real-time video surveillance -Smallest and lightest Inmarsat UAV/UGV solution -Highest performing SATCOM solution of its size, weight and price -Proven global SATCOM solution for air, land and sea -Proven reliability, dependability and security -Low power consumption -See farther with the world's smallest satellite communication solution: enabling real-time video streaming and beyond visual line-of-sight communication with consistent global high-speed broadband coverage.