Quadro expands the capabilities of Exolaunch's microsatellite separation systems with a four-point offering tailored to match the Arrow 150 satellite with masses up to 250 kg. It is currently the only separation system which is qualified to fly the Arrow 150 platform on the SpaceX Transporter missions. Quadro was crowned the most innovative separation system in Europe by winning the Innovation in Space Award 2023 at the European Space Summit, celebrating its unique blend of flight-proven technology and cutting edge four-point design securing access to orbit for the next generation of microsatellite buses.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

1. Maintenance • Depot Maintenance • Structure & Avionics Replacement, Repair, Wire Harness, Test and Inspection 2. Upgrade & Modification • Structure Upgrade and Modification • Avionics Upgrade, System Integration, Test and Inspection Highlights √ Final Assembly incl. Engine Installation √ System Integration, Test & Inspection Project Highlight : KT-100 & Light Sport Aircraft (Final Assembly), HH-60, CH-53, CH-47, F-16, P3-c, C-130H, AS-1S, MD500, NG RQ-4B ( Logistic & Ground Support)

This EGR-Cooler prototype, developed in collaboration with Hyundai Motor Company, was fabricated using EOS Stainless Steel 316L, renowned for its excellent corrosion resistance and mechanical properties in demanding automotive applications. The part was additively manufactured over a period of 64 hours, demonstrating the advanced capabilities of metal 3D printing for precision and reliability. Unlike conventional designs, this innovative component integrates 14 separate parts into a single, unified structure, greatly simplifying assembly while enhancing operational efficiency. The implementation of a Triply Periodic Minimal Surface (TPMS) structure within the cooler significantly improves heat exchange performance and enables substantial weight reduction, meeting next-generation thermal management requirements. Partners Lab stands as a leader in Korean additive manufacturing technology, offering cutting-edge capabilities in OEM production and collaborative technical development for various industrial sectors. This EGR-Cooler, designed by nTopology, exemplifies our engineering expertise and commitment to delivering high-performance thermal products for automotive and beyond.

Instead of relying on limited data center infrastructure or building from the ground up, AWS Modular Data Center delivers a cost-effective, self-contained modular data center solution that supports customers’ data center scale workloads. With this offering, defense customers can securely store, analyze, and interpret petabytes worth of data in real-time to gain military advantage in the most isolated environments.

Jonal Labs specializes in high temperature and flame resistant aerospace seals from design assistance to final product and maintenance.

CATIS™ is an ultra-high-resolution, small satellite imaging radar device independently developed by Lumir. It consists of three components: the radar signal transmission/reception device SCEU, an active phased array antenna SATA, and a data downlink antenna KaPA. This X-band imaging radar device is designed for small satellites weighing 150 kg, offering an ultra-high resolution of 0.3 m. It transmits wideband RF signals to the observation area while orbiting at an altitude of 500 km and receives the reflected signals to acquire Earth observation data.

Our XR-based aircraft maintenance simulator is officially certified by the Ministry of Land, Infrastructure and Transport (MOLIT) of South Korea for training and education. It provides specialized training environments for the A321, B737-MAX, and B737-800NG aircraft, featuring over 80 detailed modules—including procedures for engine removal, main landing gear installation, and more. This subscription-based simulator is fully compatible with smartphones, tablets, and wearable XR devices, enabling seamless access through a cloud-based web service. Users can train anytime, anywhere—perfect for both remote learning and remote maintenance scenarios. Compared to traditional classroom learning, the XR platform is 4 times more effective and requires only one-third the training time. It also improves user confidence in real-world technical applications by up to 275%. By transforming traditional paper manuals into immersive, interactive training environments, the simulator delivers the next generation of aircraft MRO education for both civil and defense sectors.