This Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. This UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS units will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC or DC output to the load. The use of lithium ion batteries permits the lowest profile and lowest weight solution in its power class. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M systems.

The APA-10 is a hybrid GPU equipped with diesel engine for continuous power and batteries for engine starting mode. Lightweight and maneuverable, the unit is perfect for indoor and outdoor use. Its relatively small size and extreme agility allow bringing the rectifier to any desired position. The elegant casing is made out of composite material, providing it long life and comfort to the user. The intuitive interface is user-friendly, making the GPU easy to control. Equipped with a highly durable chassis and mechanical braking system, this GPU is well prepared for heavy-duty and harsh conditions. The Ultra Green Power Solution Battery and Diesel engine driven GPU series APA is designed to reduce CO2 emissions with its unique technical characteristics.

Inserts are used in the aerospace industry in lightweight sandwich panels and are then bonded. The panels can then be screwed or various components can be fastened. However, the manual process has several disadvantages: Enormous expenditure of time for the manual filling of several thousand inserts, high material waste due to relaxation of the material, and high material costs through the use of cartridges. ViscoTec can map the filling process automatically. The dispensing process is absolutely precise. A significant amount of material can thus be saved. In addition, material can be supplied from large containers, which in turn lowers purchase prices. Another important advantage: As a rule, no new specifications have to be made since no changes are made to the actual process.

High precision gears and shafts for AGB, APU gearbox or transmission gearbox for helicopters Gear Grade : Upto AGMA 13 Module : 0.5 ~ 20

WPGM0507100M is a 12W Gallium Nitride (GaN) Monolithic Microwave Integrated Circuit (MMIC). WPGM0507100M is useful for high power C-band applications including 5.8GHz ISM-band systems. Spec Frequency : 5-7GHz Saturated Output Power : 100W@6GHz PAE : 51% Power Gain : 27.7dB@6GHz Operating Voltage : 28-32V

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

High design freedom of aluminum die casting and excellent mechanical properties of carbon fiber can be combined to replace high-tensile steel.

The KF-21 is the project which aims to replae the aged fighters in operation, F-4, and F-5 of the Republic of Korea Air Force and develop the indigenous Korean fighter aircraft which is equipped with performances suitable for the future battlefield of the country's air force. Korea's largest-scaled KF-21 project is the national R&D project with a development span of 10 years and 6 months and is driven with Indonesia under international joint development. Based on its development experience and infrastructure of a homegrown airplane, such as the KT-1 basic trainer, T-50 Advanced Jet Trainer, TA-50 Lead-in-Fighter-Trainer, and FA-50 Light Combat Aircraft, KAI is under development of the KF-21 project successfully. Through this project, KAI plans to develop the aerospace technology of Korea and contribute to national peace and security as well as economic development.