The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

The SCXMC-SFPDP is a high-speed optical communication card that operates through the XMC interface of the SBC. It is designed to transmit and receive large volumes of data between the SBC and other devices in real time. Unlike Ethernet, which can be difficult to synchronize, the SCXMC-SFPDP uses optical communication with synchronization signals, enabling precise and high-speed data transfer. It offers low response latency (<40 µs) and supports four transmit/receive channels at 3.125 Gbps per channel. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system to ensure reliable real-time data transmission between mission-critical subsystems.

The Pseudo-GNSS system is designed with tightly integrated firmware and hardware. The firmware generates PRN signals based on GNSS orbital data, modulates them to resemble real GNSS signals, and ensures time synchronization in a Master-Slave structure. A user-friendly GUI software enables easy device control. The hardware consists of a power unit, signal transmission unit, and communication unit. The power unit ensures stable supply through low-noise design, while the transmission unit radiates GNSS-like signals indoors. The communication unit supports Wi-Fi and wired connections for synchronization and control across multiple devices, with compatibility for smartphones and tablets to display positioning results.

1. Machining • Small, medium, and long bed machining available, with sizes up to 20 meters • Precision 5-axis machinery supporting 4m, 6m, 8m, and 20m machining beds. • Capable of machining both hard and soft metals 2. Sheet Metal Fabrication • Roll forming (11m), skin stretch forming (10m) • Bladder and stretch wrap forming • Skin milling & NC routing 3. Composite • Specialized Curing Oven up to 15M • Layup Facility 4. In-house Heat Treatment Facility (NADCAP Accredited) Highlights √ Proven Korea Defense Offset Partner for Global OEM √ Integrated Global Program Operation in Korea and USA Facilities √ Boeing & Lockheed Martin Award Winning Supplier Project Highlight : • A32X/A330 Skin Structure, Floorgrid, Doors • KT-100 Full aircraft Integration • Helicopter Fuselage, Torque Box, Bulkhead, Leading Edge etc.

The EXOpod is the most advanced cubesat deployment system on the market. It is available in 6U/8U, 12U and 16U sizes which can be broken down into smaller slots to accommodate cubesats of any size. EXOpod Nova, the latest generation of the EXOpod line, is rapidly expanding what the cubesat design standard (CDS) is capable of – cubesats launching with Nova can now increase the volume of their lateral protrusions by 400% and their mass by 30%, enabling a wider and more powerful array of satellite designs and use cases.

Drone Hunter XRS is a rifle-type drone jamming gun with an intuitive design for quick onsite responses to drone threats. Drone Hunter XRS is capable of neutralizing commercial drone frequencies including ISM band and GNSS L1 & L2 up to 1km. With its highly efficient, rugged and compact product design for lightweight, easy-to-use operation, Drone Hunter XRS is certified with IP65 and ensures the best performance from various application areas such as checkpoints, borders, military/police operations where users are supposed to move and patrol.

MOHOC® and MOHOC® IR Cameras are purpose-built for tactical operations, offering rugged, reliable video capture designed specifically for military, law enforcement, and emergency response teams. Featuring a patented helmet-contoured base and low-profile design, these cameras eliminate snag hazards and maintain a secure, stable mount throughout dynamic missions. Both models record in crisp 1080p HD video and 12MP stills, with the MOHOC® IR version capable of capturing footage under infrared illumination—essential for night operations and low-visibility environments. A single-button interface with tactile vibration feedback ensures intuitive control, even when wearing gloves or in high-stress scenarios. Fully waterproof to 10 m and drop-resistant to 2 m, the MOHOC platform meets IP68 standards and is tested to MIL-STD-810G. Integrated features such as rotating lens, one-touch recording, and CurveLock™ mount system support rapid deployment and field adaptability. When used with C6ISR networks, MOHOC Cameras enable real-time video streaming and situational awareness at the tactical edge—empowering teams with the information needed to make mission-critical decisions.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30 amplifies and transmits Camera Link signals in Base/Medium/Full configurations (up to 10 Taps supported) from a camera to a PC frame grabber. Key Features  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Supports 10 Taps cameras.  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Supports PoCL signal bypass (patented).  Features a locking DC power jack (Molex) and SDR connectors.  Compact size compared to previous models.