NICKEL 200 / 201 Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY 400 Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY K-500 Bars INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 601 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 625LCF® Sheets and Plates INCONEL® Alloy 693 Sheets and Plates-Tubes and Pipes INCONEL® Alloy C-276 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 22 Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 800 H / HT Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 825 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 1 Strip Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 7 Bars-Sheets and Plates-Tubes and Pipes

The KX2-2046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 20W saturated output power with power-added efficiency of 46%. The KX2-2046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX2-2046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-11.5GHz - Small Signal Gain: 26dB - High Pout: 20W - High PAE: 46% - DC bias: Vd=28V @Idq=0.3A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x1.66x0.1mm  

The NSP-7 combines IMSAR’s typical reliability with increased capabilities: for example, the ability to detect footprints. It can even perform SAR Motion Video (SMV) when paired with an airborne server. The IMSAR NSP-7 radar system is a high-performance, weatherized radar pod engineered for long-range Intelligence, Surveillance, and Reconnaissance (ISR) and maritime/ground surveillance missions. With advanced Synthetic Aperture (SAR) and Moving Target Indication (MTI) capabilities, the NSP-7 delivers exceptional imaging and detection in a rugged, low-SWaP (Size, Weight, and Power) package.

[LEO GNSS-R] Satellite : LEO RF Characteristics : GPS L1/L5, Galileo E1/E5a(option) Accuracy : Position ≤ 10m(3DRMS), Velocity : ≤ 1m/s Raw Data Accuracy : Pseudo-Range : 1m(RMS) Carrier-Phase : 10mm(RMS) Data Output Rate : 1Hz 1PPS Accuracy : Sync to GPS Time Data < 1us (1PPS Accuracy < 1.5us) TTFF : Cold Start ≤ 20min / Warm Start ≤ 10min Dara Interface : MIL-STD-1553B, RS-422(Data Interface) [GEO GNSS-R] Satellite : GEO RF Characteristics : GPS L1/L2C/L5, Galileo E1 Accuracy : Position :: ≤ 30m(3DRMS), Velocity : ≤ 1m/s Raw Data Accuracy : Pseudo-Range : 1m(RMS) Carrier-Phase : 10mm(RMS) Data Output Rate : 1Hz 1PPS Accuracy : 2us(RMS)/Sync to GPS Time Data TTFF : Cold Start ≤ 45min / Warm Start ≤ 20min Dara Interface : MIL-STD-1553B EEE Parts : ITAR Free Parts

The D56M differential pressure switch provides high precision measurement across a wide range of low-differential pressure conditions in a package smaller than other units of comparable capability. The membrane senses changes between the “high” and “low” pressure inlets while offering excellent repeatability and high cycle life. Optional hermetically sealed contacts mean the D56M can be well suited when vapor ignition is a concern.

Typical uses include airflow control plenums.

For a similar switch with a higher resistance to shock and vibration, refer to the D16M

For qualification information, please consult the sales or engineering departments.

Features

Intended for gaseous media
Environmentally sealed with optional hermetically sealed contacts
Proven diaphragm and leaf spring technology for high cycle life

This KF-21 fighter jet model is produced using advanced SLA (Stereolithography) additive manufacturing technology, providing both intricate detail and structural precision. Manufactured with industrial-grade ABS material, the model benefits from our fleet of six SLA machines, ensuring consistent quality and scalability for various production demands. Our in-house post-processing team delivers a wide range of finishing options, including custom color applications tailored to client specifications. Our company’s origins are rooted in expert prototype fabrication, and we have since evolved into a leader in additive manufacturing technologies. We support OEM production and prototype mock-up projects for diverse clients, building a reputation for technical excellence and collaborative development. The KF-21 model highlights our capabilities in precision model making, turning innovative designs into high-quality finished products.

IP66-rated waterproof and dustproof design Intel® Alder Lake Core™ i3-N305 with 8 E-cores -40°C to 70°C temperature operation 2x 2.5GbE via M12 X-coded connectors 1x isolated RS-232, 1x isolated RS-422/485 via M12 A-coded connectors 3x isolated DIO and 1x CAN2.0B via M12 A-coded connectors Low power and high endurance FRAM for data logger Class 1, Division 2 and ATEX certification in hazardous area applications 8V to 35V DC input with ignition power control input via M12 A-coded connector

Our AT4 family is one of the most successful anti-armour weapons ever. Lightweight, man-portable and fully disposable weapons, each is optimised for anyone to use.