Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

EMCORE’s IPADS-I (International) provides significant enhancements for today’s Army and Marine Corps survey teams. IPADS offers a proven, reliable, lightweight, off-the-shelf solution developed around four main components. > Compact Position/Navigation Unit (CPNU) > Control and Display Unit (CDU) > Battery and Charger Unit (BCU) > Porro Prism Assembly (PPA) All components are housed in a robust frame that allows for easy component access and stability, while facilitating a ready, two-person transfer between vehicles and aircraft. Features High-precision common survey enables efficient mass fires Impervious to jamming (inertial mode) Embedded Selective Availability Anti-Spoofing Module (SAASM) GPS option Navigation aids (compass rose and digital maps) In-vehicle and offset survey Combat-proven Embedded Built-In Test (BIT) High reliability MTBF, low mean time to repair (MTTR) No periodic calibration required Applications Artillery Survey to Mark: Survey Control Point (SCP) position; used to initialize weapon systems Orienting Line (OL) position and azimuth; used to initialize and align artillery assets

This is a contact-type and non-contact optical cable assembly for high-speed transmission of large-capacity signals such as video signals. It is a cable assembly for optical signal transmission in compliance with MIL standards by utilizing a contact/non-contact connector developed by Yeonhab Precision.

DI Optical’s new EG1 prism gunsight provides a parallax free reticle for increased accuracy and rapid target acquisition. The shaded 30mm lens provides a wide, crystal clear field of view. CNC machined from a solid billet of aircraft quality 6061-T6 aluminum, the compact EG1 is unsurpassed in ruggedness and reliability. The rotary brightness switch can be conveniently operated with a gloved hand.

Amphenol Ltd, is an innovator of interconnect solutions for the Aerospace and Defence markets. For over 60 years, Amphenols’ UK team have been producing innovative products for harsh environment applications globally.

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

The KX2-2046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 20W saturated output power with power-added efficiency of 46%. The KX2-2046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX2-2046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-11.5GHz - Small Signal Gain: 26dB - High Pout: 20W - High PAE: 46% - DC bias: Vd=28V @Idq=0.3A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x1.66x0.1mm  

- Minimizing the station's door opening and closing time to support drones' quick entry and exit. - Structural design to minimize noise and vibration when opening and closing the door - Design and implementation of an interface for interaction between an automatic door system and a drone. - Automatically opening and closing door system - Automatic detection of drones through cameras and sensors, and safe storage and charging functions