Brazing is bonding two or more pieces of metal by means of flowing a filler metal between the joint interfaces at a temperature below the melting point of the base metal. The filler metal, upon cooling to the solid state, forms a strong metallic bond throughout the joined area. Through Dip-Brazing, RF Systems manufacture 1. Brazed Antennas 2. Brazed Waveguides 3. Brazed Divider / Combiner

Supports non-destructive inspection of aircraft composite skin structures and is composed of a piezoelectric layer sensor, data acquisition equipment, and damage analysis software. Utilizes piezoelectric sensors to generate Lamb-wave and acquire signals, collecting data to accurately detect and assess composite damage. Visualizes inspection results on display such as damage location, size and index. - POD Accuracy: 1 inch 90% or more - POD Precision : Position error within 30 mm - 64 channels / 230 path reference detection time within 10 minutes - Sensor : Resonance resistance less than 400kΩ - Sensor : MIL-STD-810G - Sensor : RTCA DO-160 Section 23.0 - DAQ : x128 Piezoelectric sensor interface

By affiliating with asahi-Kasei EMD in 1999 recognized as a greatest electronic and chemistry company in Japan, we have been supplied Master roll by Asahi-kasei and that allowed us to meet our customer's needs from the time our company was established. We supply not only household products but also high technology semiconductor package products for domestic market.

Specialty Tool Kits and Custom Sheet Metal Kits

This solution leverages LLM-based data interpretation technology to detect process anomalies in advance, providing alerts and countermeasures before defects occur, thereby ensuring sufficient response time. It also analyzes issues such as positional misalignment or print degradation patterns during the process, matches them with various event timelines, identifies the root causes of defects, and delivers the findings in the form of analytical reports

- Compact size with built-in drive, position sensor, DC motor and gear box - Better durability & faster speed under similar rated load comparing to 12Lf series thanks to the bigger 17mm diameter DC motor - Position, current and speed control along with position & current feedback - Easy digital extended I/O control through 4 x Expansion I/O ports (No coding) - 27/37/50/87mm(*) stroke option (*): Each 3mm stroke can be added when adjusting the long stroke limit through Total Manager software. Rated load of 17N~70N depending on the lead angle for each stroke (Speed is inversely proportional to the rated load, so the higher the rated load, the slower the speed.) - RS-485 MODBUS-RTU protocol applied (IR open protocol is not provided) - Action feature which enables user’s motion save & run

Hermetic connectors are a special class of sealed Mil /Aero interconnect that incorporates glass-to-metal or other highly-engineered sealing technology. Hermetic seal connectors are specified for applications as divergent as submarines and orbiting satellites. They are deployed to resist moisture ingress in underground applications and to withstand pressure differentials in vacuum chambers, laboratory equipment and commercial and military aircraft. Hermetic seal connectors, such as the MIL-DTL-38999 Series I, II, III and IV supplied by Glenair, are principally designed for use in military aerospace — in fact, the sealing requirement for connector hermeticity was originally driven by military electronic applications. But the products are equally at home in commercial applications such as oil-patch, logging equipment or medical devices.

Haynes International Inc. is a manufacturer of metal alloys employing more than 1,070 employees worldwide with sales of $434.4 million in 2007 with 8 plants ...