R HUGHES' Ca-Zoom PTZ 140 is a Pan-Tilt Zoom Camera inspection equipment equipped with the Ca-Zoom® 6.2 system. This equipment is capable of a total of 432x zoom with 36x optical zoom and 12x digital zoom, increasing inspection efficiency. In addition, two high-performance 35W lights are installed in the light source to enable more smooth inspection. The inspection technology of the PTZ Camera Ca-Zoom® line of products makes them ideal for inspecting large areas that are difficult for humans to access, such as tanks, vessels, pipelines or nuclear power plants.

- 1 axis Fiber Optic Gyroscope - Bias Repeatability (over temp. range): ≤ 1.0º /hr (1σ, RMS) - Angle Random Walk: 0.035º /√hr (typical, 1σ) - Power Consumption: 1.3 W @ 25℃ (<2.4 W, @ -40℃) - Input Voltage: + 5 V - Weight: 165 g (0.36 lbs)

Material: SS400-540, SPPS and ALDC1-8 Application Equipment: 60mm Mortar Purpose: Training for Prectice

Two-lug nutplate with bracket-retained nut element for FOD-critical applications where nut replaceability is desired but nut element retainer clips are not permitted. Supplied with integral elastic installation fixture. Fixture simplifies nutplate installation by providing bondline clamp-up and maintenance of concentricity with the fastener hole, ensuring full availability of nut float and protection of threads from adhesive.

1. Operation / Full Management L2·L3 Switches - 1G 8 PORT, 12 PORT, 24 PORT - 10G (option) - WEB, CLI, Telnet, SNMP V2/V3 management 2. SWaP / Safety / Network 3. Design and supply customized interfaces according to the specific requirements of each system.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

The SBC3612D is a rugged 3U VPX single board computer aligned with the compute-intensive SOSA profile, delivering high-performance processing with the Intel® Xeon® D-2775TE 16-core processor and flexible expansion capabilities. • Supports up to 64GB DDR4 SDRAM and 480GB NAND Flash (NVMe SSD) • Offers 100GbE and 10/25GbE data plane and control plane support • Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA for enhanced security

Amphenol CANADA, part of the Amphenol Military Aerospace Operations (AMAO) group, is a global leader with over 50 years of experience in providing customized solutions for customers through design, manufacturing, and testing of rectangular interconnects applicable to military/aerospace and commercial applications. As a vertical integration company, we have full-scale facilities for design, manufacturing, and testing, enabling us to provide customized solutions tailored to each application. As a vertical integration company, we offer customers a competitive advantage by reducing costs through shorter lead times. We can also perform testing tailored to customer specifications.