[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

Shell : Silicone Rubber(Black) solderless terminal : KS D 5202, C5210R1/2H Rope : Nylon code(Black) Terminal : STS304(Black)

The operation of robotic inspection systems in an industrial environment requires a reliable control station. The second generation integrated control station -ICS 2- gives operators an all-in-one tool. Supplied in a rugged hardshell case (Pelicase®), embedded components such as a 21.5-inch touchscreen, high-performance PC or joystick can be selected according to industry standards. It also boasts a 10-year spare parts guarantee as well as extreme robustness and reliability even in harsh environments. Simplicity and ease of operation were key when developing ICS 2. The operator connects the robotic platform with one single cable and using the integrated joystick, operation is simple and self-explanatory.

Inverter platform developed by entirely by Drive System Design with a focus on versatility and flexibility, resulting in a powerful and highly versatile hardware and electronics base platform, which can operate: - From 200 to 800V and beyond, - At a Continuous Output of 450A rms - Delivering an output Power up to 300kW and - A PWM frequency from 20 to 30kHz

Haigh-Farr offers a family of low-cost Blade antennas covering frequencies from 300 MHz to 8 GHz. These antennas have been in use for over 30 years in airborne applications, and most models are available for off-the-shelf delivery. Haigh-Farr also offers a series of broadband blade antennas covering a variety of frequency ranges.

Our ultra-premium MDB961WP is engineered with an efficient brushless motor and magnetic encoder delivering uncompromised performance and reliability. Operating at a wide voltage range from 8V up to 32 volts, this powerhouse actuator produces massive torque and high speeds with 32-bit digital programmability and IP-67 waterproof rating. Perfect for DroneCAN (UAVCAN v0) command protocols, the MDB961WP is ideal for industrial applications requiring unbeatable precision, strength and durability. #UAV #UAS #UGV #UUV #USV

The FORCE2C is a rugged 3U VPX flight-certifiable mission computer featuring a QorIQ T2081, full avionics I/O, safety certification artifacts (DO-254/178C up to DAL A), and FACE compatibility. • QorIQ T2081 (1.8 GHz, 4 cores), SBC314C SBC: 4 GB DDR3L, 16 GB SSD, PCIe Gen 2 ×4 • Avionics I/O: ARINC 429 (8 TX, 10 RX), MIL-STD-1553 (4), discrete I/O, serial (RS-422), GbE, USB, RS-232/422 • Rugged conduction-cooled build; MIL-STD / DO-160 rated; −40 °C to +71 °C • DO-254/DO-178C certification artifacts available (DAL D to A) • FAA certified (SOI complete), FACE compliant