3U OpenVPX SSD is a rugged, reliable, high-performance NVMe SSD solution. Since the 3U OpenVPX SSD is a NAND flash-based SSD, reliability is improved in environments with vibration and contaminants compared to existing hard disk drives (HDDs). Additionally, it has the advantage of low latency and high-speed data transfer speed through the NVMe interface based on PCI Express. This is a significant advantage in high-risk combat environments.

Our products are used for manufacturing interior design components for civil and military aircraft construction. Sandwich structures are used in many areas of an aircraft (storage compartments, interiors, wings) to reduce weight. In order to structurally strengthen the honeycombs or insert them, they often have to be filled during the production process. Typical materials are one- and two-component epoxy resins with a very high proportion of hollow glass spheres. These require extremely gentle handling, as they would otherwise be destroyed, which in turn would result in an increase in density. Common application patterns are beads, circles, full surfaces and egde-filling. The job is often done manually, which results in long production times and high running costs due to material waste. Lack of reproducibility is just as problematic as the health hazard often posed by these media. The ViscoTec solution: Material is continuously fed to the dosing system by removal from a large container. With the help of a robot or axis system, suitable structures can be mapped reliably. A coordinated overall system delivers a dispensing result according to specification, in which operator interaction is reduced to a minimum.

Low Size, Weight and Power (SWaP) at only 297g. Up to 100 TOPS GPU by NVIDIA® Jetson Orin™ NX Supports multiple camera and sensor interfaces 2x GbE and 2x USB3 for RGB/ Infrared/ hyperspectral cameras and lidar/ radar 2x GMSL2 for HDR/ 3D cameras Built-in UART and CAN to interact with flight controller 1x M.2 2230 for storage and 4G/5G communication ready Supports 4S-14S drone battery pack Compatible GMSL2 cameras with pre-built drivers

Processor - NXP Quad Core PowerPC QorIQT2080 up to 1.8GHz - 6 DMIPS/MHz per core (up to 43,200 DMIPS@1.8GHz) - 128b AltiVecSIMD unit (up to 72 GFLOPs@1.8GHz) Memory - 4GB soldered 64-bit DDR3L SDRAM with ECC - 256MB 16-bit NOR flash - 64GB SATA NAND SSD - 512KB NvRAM Form Factor - 3U OpenVPX - Conduction-Cooled

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

The Striker II digital Helmet-Mounted Display (HMD) builds on the decades of combat-proven performance by the Striker HMD, used on Typhoon and Gripen aircraft. The only full color solution with integrated night vision available anywhere, Striker II gives pilots unparalleled situational awareness, next generation EBAPS™ night vision, optional 3D audio, and battle proven target tracking technology - all in an integrated, visor-projected digital HMD system.

Rolatube Tripods are purpose-built for applications where mobility, speed, and performance matter. Constructed from Rolatube’s patented rollable composite material, each tripod offers a durable yet lightweight structure that rolls or folds down for easy transport and storage. Designed to support a range of payloads and mission profiles, the lineup includes the highly portable System 30, versatile Industrial Compact Tripod, and robust System 50 Tripod MIL for demanding field operations. These tripods are engineered for rapid deployment and compatible with Rolatube masts or other payloads requiring stable elevation. Their corrosion-resistant build, compact footprint, and tool-free setup make them ideal for communication, surveillance, and sensor support across defence, emergency response, and industrial sectors.

Large size - Shell size 15


The HXB15 Connectors, featuring expanded beam technology, hermaphroditic connection, rugged construction for field deployment and hybrid configurations, have been designed for harsh environment applications such as military tactical communications, avionics, offshore systems, outside broadcast, mining and plant.

The expanded beam technology uses expanded and collimated beams to couple optical fibers without any contact. It could allow for optics to be used in areas that have been quite restrictive due to presence of damage or contamination at the fiber end. Hermaphroditic connector design enables fast deployment by daisy-chaining multiple cable segments. HXB15 connectors also enable transfer of electrical signal or power using hybrid insert configuration.

FEATURES
·Advanced expanded beam technology
· Rugged field deployable fiber optic connector
· Hermaphroditic interconnection
· 2 to 10 Optical Channels for Singlemode or Multimode
· Optical / electrical hybrid variants
· Custom configurations available
· Environmental sealing (IPX8)
· Very high resistance to vibration, shock, environmental effects, dust, and debris