Custom Technical Elastomeric Solutions

Using a data storage module and a series of high-speed switches, our solution offers expandable memory up to 64 TB and high-speed processing power. Along with our attendant control panel, designed to reduce the crew's workload, we offer a complete end-to-end solution.

Smiths Interconnect is the world leader in spring contact probe design. EZiCoax is a single-piece, spring-loaded compression mount Coax for high-speed signaling between two PCBs. Designed for high performance in the harshest conditions, EZiCoax offers a fully compliant, highly reliable connection with lower cost of ownership.

Fast and Intuitive Quality Inspection With precise AR overlay technology, deviations between 3D design data and real-world objects can be identified instantly. This enables fast and accurate quality inspections on the spot. Optimized and Lightweight 3D File Processing Supports the four most popular 3D file formats: FBX, GLTF, OBJ, and STL. Lightweight processing ensures faster matching and smoother inspection workflows. From Inspection to Report — All in One Inspection results can be recorded and documented with image captures, drawings, and notes. Final reports can be exported in PDF, XLS, or CSV formats, making them easy to share and manage.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

PBS TJ150 turbojet engine features a compact design and excellent thrust-to-weight ratio. Built-in starter-generator provides reliable starting and power to the deck network. Customisation possible (adjustment of hinges, length of outlet nozzle, etc.) A version of the engine with pyrotechnic ignition is available. A version of the engine is available that allows it to be re-used after a landing in salt water.

ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

KNF offers high qualified Aluminium products used in a wide range of markets around the world. *No.1 Stockholding & Qualified Aluminium Supplier *A1XXX/A2XXX/A3XXX/A5XXX/A6XXX/A7XXX Series and more *Business Areas: Aerospace & Defense / Semiconductor & Display / Marine & Silo / Automotive & EV Battery / Others