The Harxon JH001 and JH003 antennas are purpose-built for UAVs operating in environments with jamming and spoofying, offering superior anti-jamming capabilities far beyond ordionary helix antennas. Leveraging advanced beamforming technology and pre-multiple filtering, these antennas significantly enhance signal quality by effectively suppressing out-of-band noise and mitigating multipath interference. This ensures robust, high-precision centimeter-level positioning, making them ideal for critical UAV applications.

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

Haigh-Farr offers a family of low-cost Blade antennas covering frequencies from 300 MHz to 8 GHz. These antennas have been in use for over 30 years in airborne applications, and most models are available for off-the-shelf delivery. Haigh-Farr also offers a series of broadband blade antennas covering a variety of frequency ranges.

The S10s, the first model of the PabloM series, is a loitering munition designed for strike missions. Leveraging mesh communication and AI-enabled swarm flight, it can execute both simultaneous and sequential self-destructive strikes against targets, effectively neutralizing diverse “anti-drone” systems. The S10s launches autonomously from a dedicated platform and can sustain flight for over 30 minutes, enabling wide-area operational coverage. When engaging a target, it performs a steep dive of up to 45 degrees at speeds reaching 150 km/h, ensuring rapid and precise impact. Built from lightweight foam-board materials, the S10s is optimized for fast, large-scale production during operations. Furthermore, its modular open-architecture design, aligned with the K-MOSA concept, allows mission payloads to be quickly swapped and integrated, delivering exceptional flexibility and interoperability in real combat environments.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

SURI-I is a lightweight and compact sized thermal weapon sight, optimizing firing capabilities for various kinds of rifles in the day and night time condition. It could be supported by HMD(Wireless Goggle) for indirect looking fire like corner shot to secure targets in hiding position.

- Within the aircraft exterior inspection system, data aggregation and transmission are provided. - Data collection and storage via the server are provided. - User authentication and other system management are provided. - User interfaces are provided for administrators.

This KF-21 fighter jet model is produced using advanced SLA (Stereolithography) additive manufacturing technology, providing both intricate detail and structural precision. Manufactured with industrial-grade ABS material, the model benefits from our fleet of six SLA machines, ensuring consistent quality and scalability for various production demands. Our in-house post-processing team delivers a wide range of finishing options, including custom color applications tailored to client specifications. Our company’s origins are rooted in expert prototype fabrication, and we have since evolved into a leader in additive manufacturing technologies. We support OEM production and prototype mock-up projects for diverse clients, building a reputation for technical excellence and collaborative development. The KF-21 model highlights our capabilities in precision model making, turning innovative designs into high-quality finished products.