Optimized and qualified for next generation Electronic Control Units the Intercompact Series is an innovative solution for PCB to PCB and floating mouting rack and panel applications currently offered in both signal and Ethernet versions. Designed to meet the requirements of the rail and industrial environments, it is also suitable for other demanding markets such as defence, space and test & measurement.

D-100 MIL 1&2 operating Instructions.

We conduct business with a diverse range of prime aerospace OEM’s. Together, we harness the power of partnership to enhance the OEM’s ability to create and sustain long-term advantages in military markets and program updates.

- Form factor: 6U VME64x - Processor: Intel® E3-1505Lv6 2.2GHz 4 Cores and 8 Threads - Memory: 16,000MB DDR4 SDRAM w/ECC, (1) 73GB up NVMe SSD

Side shells, wing shells and fuselage structures are made of CFK, GFK, aluminium or organic sheets and get connected during production. Sealants are used to seal the connection surfaces. These are usually two-component polysulphides, which have to be applied in different geometries. Typical applications are: Fillet sealings, oversealings, interface sealings and seal caps. Due to their properties, polysulfides require very low pressure and shear handling. The compressibility of the fillers contained in the medium requires a high level of expertise and a coherent overall system from material removal to application. With manual application, long production times and high material ejection have a negative influence on the complete process. Complex quality standards are required due to the risk of human error. With the in-house developments of the vipro-DUOMIX from ViscoTec, this process can be depicted fully automatically. The individual nozzle design is also adapted to each application. The result is a controlled dosage in compliance with the specifications and at the same time the highest repeat accuracy.

Hydraulic top bracing is an attenuation device installed between the main engine and the hull of the ship to reduce thermal expansion and vibration from the main engine to natural frequencies. The operating principle is an automatic control operating system through in/out and on/off the operating range of the hydraulic top bracing according to the rpm of the main engine. The number of hydraulic cylinders per engine is typically 2, 4, 6 depending on the type of engine, up to 8 are installed if necessary, and 1~2 of control panels are installed.

Product Specifications: Reduce weight and achieve high durability by applying high-strength materials Customer Mercedes-Benz in Germany

ElectroAir’s mobile APA-65 -series combined units consist of frequency converter units (AC rated output power up to 45 kVA) and rectifier units (DC continuous current up to 800A). These units are intended for the ground servicing of all aircraft types with a frequency of 400Hz and voltage 115/200 V and to power on-board electrical equipment and launch aircraft/ helicopters with a voltage of 28.5 VDC. APA-65 series is designed to eliminate CO2 emissions with its unique technical characteristics. Diesel hybrid unit and battery driven unit - unit can perform the complete service of aircraft at remote parking places with diesel engine / through batteries and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location. These units are very compact in size and weight.