- To measure RCS for the aircrafts, warships, helicopters, chaff and etc. - Verify to meet pre-defined RCS specifications on design phase.

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

VERSAWAVE HIGHLIGHTS: -Real-time video surveillance -Smallest and lightest Inmarsat UAV/UGV solution -Highest performing SATCOM solution of its size, weight and price -Proven global SATCOM solution for air, land and sea -Proven reliability, dependability and security -Low power consumption -See farther with the world's smallest satellite communication solution: enabling real-time video streaming and beyond visual line-of-sight communication with consistent global high-speed broadband coverage.

We bring all our skills and expertise to bear in product development and in-service support in order to meet our customers' needs: 3D drawings and design Aeroelasticity Thermal, CFD analysis Static and dynamic analysis Electrical/hydraulic/mechanical system design Cost-optimized design, cost-benefit analysis Parametric experiment design Optimization techniques and algorithms Multiphysics modeling Concessions management: control plan, extension of concession, design engineering office, concession justification, impact analysis (FMECA, process/design change, etc.), definition of a repair program, updating of certifications Flight physics Configuration management Design, calculation and modeling Composite or metallic parts

- Within the aircraft exterior inspection system, data aggregation and transmission are provided. - Data collection and storage via the server are provided. - User authentication and other system management are provided. - User interfaces are provided for administrators.

The 20W X-band BUC is a satellite ground transport terminal that includes a receive rejection filter and performs IF-to-X-band upconversion using an internal reference frequency. It features dustproof, moisture-proof, and waterproof protection, along with self-diagnostic functions such as fan and temperature alarms. The unit provides a total gain of over 50 dB and supports a wide bandwidth of 500 MHz. Its frequency stability is maintained within 0.35 ppm.

Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30x2 transmits two independent sets of Base, Medium, or Full configuration Camera Link video signals (supporting up to 10 Taps per set) to a PC frame grabber. Each transmission layer can be configured independently .

ACE is a comprehensive ecosystem of smart apps designed to streamline the entire aircraft and cabin interior configuration process. From aircraft manufacturers to buyers, leasing companies, and interior suppliers, ACE enables seamless management within a single, fully digital workflow.​ With ACE, you can enhance efficiency, reduce errors, and ensure every step of the configuration process is done accurately and on time.