PELICAN-D JT is a MWIR detector for missile applications. The FPA is InSb based, having digital Readout Integrated Circuit (ROIC) in a format of 640 x 512 with 15μm pitch. Pelican-D JT has a unique structure of Dewar which enables very fast cool down time and hence quick mission readiness using Joule-Thomson (JT) cooler. Due to the low heat load on the focal plane, the detector achieves long mission duration. The Detector can be supplied with a proximity board which provides Camera Link interface to the customer system. This highly simplifies the integration of the detector to the system.

The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens is a first to market low-Size, Weight, and Power (SWaP), compact lens, for the newly introduced 5μm SXGA, as well as for 10μm SXGA, and 15μm VGA SWIR detectors. The SWIR & NIR zoom lens employs a unique mechanical and optical design, resulting in an all-around smaller and lighter unit with only 860gr in weight, and 224mm in length, making it approximately 60% lighter than similar existing SWIR lenses. The SWIR lens is also chromatically corrected to support a broader short-wave IR wavelength regime from 0.7-1.7μm and operates with minimal distortion. The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens presents an unrivaled combination of SWaP capabilities, detection range exceeding 26km. Product features: • Continuous zoom in the 0.7-1.7μm SWIR regime • Designed for 5μm, 10μm SXGA & 15μm VGA SWIR detectors • Lightweight (<860 gr) • Detection range >26 km • Enables laser-line detection

Processor - 64-bit Quad Core PowerPC QorIQT2080 up to 1.2GHz - 6 DMIPS/MHz per core (up to 28,800 DMIPS@1.2GHz) - 128b AltiVecSIMD unit (up to 38.4 GFLOPs@1.2GHz) Memory - 4GB soldered 64-bit DDR3L SDRAM with ECC - 256MB 16-bit NOR flash - 64GB SATA NAND SSD - 512KB NvRAM Form Factor - 6U VME - Conduction-Cooled, Air-cooled support

C-17 GLOBEMASTER III

Slice6 AIR, Slice6 Air BR 는 극한 시험 환경에서 아날로그 신호를 정밀하게 측정할 수 있도록 설계된 통합 데이터 수집 장비로, 크기, 무게, 전력(SWaP)에 최적화되어 제한된 공간과 질량 조건에서도 효과적으로 운용할 수 있습니다. 각 모듈은 마이크로프로세서, 이더넷 스위치, 신호 조정 회로, 비휘발성 메모리를 포함하고 있습니다. 독립형, 네트워크형, 기존 시스템 통합형 등 다양한 운용 방식에 대응하며, IRIG 포맷 기반 실시간 스트리밍과 이중 저장 기능을 통해 실시간 모니터링과 백업을 동시에 수행할 수 있습니다. Ethernet-based data acquisition unit (DAU) for flight test and ground shock test. SLICE6 AIR, SLICE6 AIR BR is a complete data acquisition unit for measuring analog signals in extreme test environments. Optimized for size, weight, and power (SWaP), SLICE6 AIR is ideal for applications with tight size and mass constraints. Each module features a microprocessor, Ethernet switch, signal conditioning, and non-volatile memory. The versatile SLICE6 AIR can be used standalone, networked for high channel count tests, or integrated into existing Ethernet-based flight test instrumentation. Real-time streaming in IRIG formats and dual store-in-place recording enables both real-time monitoring and redundant back-up of data on a single device.

6 barrel Electrically driven machine gun operating a 1700 & 3000 rounds per minute.

We have taken the standard housing configuration of the P1 & P3 mounting dimensions while incorporating true differential pair contacts within the P1 & P3 dimensional constraints. P1 connector housing contains 21 position true differential pair blind mate contacts allowing board designers to carry high density differential pair signals from the LRU via motherboard to daughter-card plug in modules with a single connector P1 type housing.

Powerful multi-tasking capacity for higher productivity • Even higher multi-tasking capability is available from SMX machines through the combination of the left and right spindles, the B-axis milling function and a lower turret ideal- making the machines ideal for complex, high-precision machining. • Orthogonal structure maximizes machining space. • 12 station high-rigidity servo turret ensures accurate and powerful cutting performance, and outstanding process reliability. Outstanding control delivers higher precision • 0.0001-degree precision control function of B-axis and C-axis enables high-precision machining. • Minimized thermal displacement of the spindle and feed axis by the optimized cooling solution and smart thermal compensation ensure high precision even during long machining runs and extended use. Easy and convenient functions • Front located tool magazine and convenient ATC operation panel make it easy to change and replace tools, and monitor and check tool change operations. • Side-to-side movable swivelling operation panel with adjustable height settings. User friendly work guidance function. • User friendly work guidance function.