Spring loaded High Frequency Micro-D Coax Connectors (MDHC) offer low VSWR up to 40 GHz (typ). These connectors have a constant 50 ohm airline impedance interface and are 30% smaller than our SCX coaxial connectors.

EMCORE’s exclusive photonic integrated chip (PIC) technology delivers improved reliability and repeatability. The precision non-ITAR GEO-FOG 3D Dual features two GNSS antennas on a fixed PTK baseline to offer increased heading, pitch, and roll accuracy for static and dynamic applications where a single antenna system can be problematic. This dual antenna INS is the best choice for systems requiring heading at start-up or in low dynamic conditions. Highlights Data rate 10x faster than other available systems Cutting-edge sensor fusion for dependable, precise navigation in a full array of applications and conditions Six degrees of freedom (DoF) IMU with integrated gyros and accelerometers Technology Details Photonic Integrated Chip Technology EMCORE’s new photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s even more reliable and delivers superior repeatability unit-to-unit. With three of these integrated photonic gyros at its core, the P-1750 IMU enables the GEO-FOG to provide the safe, accurate performance autonomous platforms demand. Learn More DSP Technology EMCORE’s DSP electronics improve FOG performance in critical areas such as scale factor and bias vs. temperature, scale factor linearity, and maximum input rate. EMCORE’s exclusive DSP design overcomes the limitations of analog signal processing, eliminating temperature-sensitive drift and rotation errors. GEO•FOG Manager The GEO•FOG Manager is ideal when integrating EMCORE’s GEO•FOG 3D and GEO•FOG 3D Dual INS. Learn More Developer’s Kit for Rapid Integration The KVH FOG/IMU Developer’s Kit includes easy-to-use software to accelerate your IMU and FOG integration, development, and interface efforts.

A compact demonstrator aircraft derived from the B-33X platform, developed as a scaled model to showcase the core design and technology of SAMBOMOTORS’ next-generation large AAM. It retains the key aerodynamic and structural characteristics of the original model while optimized for testing, demonstration, and exhibition purposes.

Amphenol Aerospace designs and manufactures QPL Mil-spec and custom circular and rectangular electrical and electronic connectors for the military and aerospace industries. We also specialize in designing and building high-speed cable assemblies, media converters and Ethernet switches, fiber optic connectors and cable assemblies, high power and high voltage connectors, EMI/EMP filter connectors, hermetically sealed connectors, and a variety of special applications connectors and custom interconnect systems.

Designed with durability in mind, the SG20BL is equipped with a robust M8 circular connector, hardened steel gears and an impressive IP-68 rating, ensuring it can withstand harsh environmental conditions while maintaining optimal performance. With a Mean To Time Failure (MTTF) of greater than 1,000 hours, users can trust our servo to deliver consistent functionality throughout its operational lifespan. Available in both a 12V and 24V model with wide operating voltages of 9-15V and 18-32V, respectively, the SG20BL also features an ultra-efficient brushless motor delivering exceptional power-to-weight ratio and a contactless magnetic encoder offering enhanced responsiveness. The implementation of CAN 2.0A,B / DroneCAN command protocols further streamlines communication and integration with advanced unmanned systems. #UAV #UAS #UGV #UUV #USV

- Urban drones specialized in surveillance/spatial information/disaster safety/facility survey - Completed localization of core components! Equipped with encryption KCMVP Dimensions (WxLxH) : Flight / 360x360x160mm(h) Folding / 260x260x160mm(h) Airframe Weight : 2kg or less (max take-off weight) GNSS : RTK / GNSS (SBAS supported) Flight Time : 30 minutes

The MD250MW is a 15mm, metal gear, mini servo with dual ball bearings and a cored motor with carbon brushes. Engineered with a programmable digital amplifier and magnetic encoder to deliver high performance and reliability for remote, unmanned aerial vehicles and ground-based automation applications. Operating via DroneCAN (formerly UAVCAN) command protocol at a wide voltage range from 4.8~7.4 volts, this compact actuator produces impressive torque and high speeds in its mini class. The MD250MW servo is ideal for a variety of applications requiring an efficient balance of performance and cost. #UAV #UAS #UGV

This product is a test-rig to test the injection and function of various fuel (diesel oil, gas) objects of the main engine. This product model is made from slide fuel valve types of traditional diesel engines to latest dual fuel gas engines GI, GI, LGIP, LGIM/X-DFM, and ammonia fuel valve engines LGIA and X-DFA types, and we are directly doing everything from design to production. In accordance with the maintenance regulations recommended by Everllence and WIN GD, it is a product that tests the normal functionality of fuel injectors of main engine after disassembling, cleaning and reassembling of fuel injection valves.