1) Fabrication - possible Dismension : ~ D 1200 mm - Surface Errors PV < 79 nm RMS < 12 nm Roughness < 2 nm(Typical < 1nm) 2) Lightweight - lightweight Ratio : up to 82.5 % - Rib Thickness : ~ 2 mm - Face Sheet : ~ 7 mm - Lightweight Design & Fabrication

ABC Software : ORCHID To meet the management requirements of the Control / Command / Acquisition part of our test benches, ABC has designed and developed its own standard and reliable software package: ORCHID. Easy to access and requiring no IT expertise, it is the result of many years of experience in the field of ...

Lumir is the first Korean company to successfully develop and manufacture this onboard equipment, delivering superior performance and significant cost savings compared to competitors’ products. By integrating non-volatile NAND flash devices into the image data handling unit, storage capacity has been significantly increased, with data retention maintained even when the power is off.The image data handling unit of the satellite is a core device that receives high-speed, large-capacity data output from Earth observation sensors mounted on the satellite—such as SAR or optical cameras—then compresses and stores the data in real time, while also performing encryption and encoding for transmission to ground stations. Lumir has successfully developed and manufactured this satellite-mounted device domestically in Korea for the first time, breaking reliance on imported technologies. This achievement secures Lumir’s competitiveness by delivering superior performance and significant cost savings compared to foreign products.

The HPC2812 is a rugged 6U VPX high-performance computer aligned with the compute-intensive SOSA profile, delivering top-tier processing with dual Intel® Xeon® D-2700 (Ice Lake-D) processors and flexible expansion capabilities. • Supports up to 128 GB DDR4 SDRAM with ECC and 480 GB NAND Flash (NVMe SSD) per node • Offers 2× 100 GbE (or 4× 40 GbE) data plane with RDMA, PCIe Gen 4 expansion plane, plus control and management plane support • Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA for enhanced security

V-BAT은 전투 검증을 마친 플랫폼으로, 유사한 성능의 Group 4 및 5급 대형 무인기 대비 비용과 물류 부담을 획기적으로 절감하면서, 전략 및 전술 수준의 ISR(정보 수집·감시·정찰)과 표적 획득 기능을 제공하는 기동성 중심의 운용 플랫폼입니다. 전자전 환경을 고려해 설계, 시험, 실전 배치된 V-BAT은, GNSS 차단 및 통신 간섭 상황에서도 임무 수행 효과성을 실전에서 입증한 바 있습니다. V-BAT은 미 해안경비대(Maritime UAS Services Program)의 공식 채택 플랫폼으로 선정되었으며, 미 해군의 거의 모든 함정과 해병대 전진기동부대(MEU) 전 편대에 실전 배치되었습니다. 독자적인 설계 및 제어 기술을 통해, 강풍, 혼잡한 비행 갑판, 이동 중인 함정 등에서도 4.6m x 4.6m 수준의 협소한 공간 내 이착륙이 가능합니다.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

K806 - With the increasing number of borderless missions throughout the globe and infantry units who need to complete their missions as quickly as possible, the 6x6 Wheeled Armored Vehicle is aimed at performing in the rear for the purpose of defending military facilities, transporting forces, conducting logistics convoy and reconnaissance missions. K808 - 8x8 Wheeled Armored Vehicle(K808) is designed to support rapid deployment and reconnaissance operations of infantry in battlefields and mountains. Capable of both running on ground and water, K808 is also capable of arming up with different weapon systems such as Remote-Controlled Weapon System(RCWS) and medium caliber turret.

Titanium Grade 1 Strip Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 ELI Bars-Sheets and Plates Titanium Ti-6Al-7Nb Bars