옥외 스펙트럼 모니터링 및 위치 탐지 솔루션 R&S®UMS400 범용 모니터링 시스템은 8kHz에서 8GHz까지 스펙트럼 모니터링 및 방향 탐지를 지원합니다. 또한, R&S®CS-MC20 마이크로파 컨버터를 통해 최대 20GHz까지 확장할 수 있습니다. 무선 통신 서비스의 주파수 범위가 점점 증가함에 따라 최대 8GHz, 경우에 따라 최대 20GHz까지 모니터링 스테이션이 필요합니다. 일반적으로 가장 높은 감도를 위해 케이블 손실을 최소화하기 위해 안테나 근처에 모니터링 센서를 설치해야 합니다. R&S®UMS400과 R&S®CS-MC20 모두 옥외 하우징 옵션을 통한 야외 설치가 가능합니다.

The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

This Ka-band antenna and data transmission device incorporates electronic beam steering antenna technology and software-defined radio technology as part of the Ka-band downlink system for satellites. It serves as a key component of data downlink systems within the satellite payload, supporting high-speed data transmission. The device enables system optimization through miniaturization, lightweight design, and single-unit modularization.

The SWE550S is a rugged 6U VPX fully managed Layer-2/3 Ethernet switch aligned with the SOSA profile, providing blazing-fast 25/100 GbE switching via a 3.2 Tbps fabric and flexible I/O reconfiguration. • 3.2 Tbps switch fabric delivering full wire-speed bandwidth (~2.5× typical) • Front: up to 2×100 GBASE-SR4 (MPO); Rear: up to 7×100 GBASE-SR4, SWE540A-compatible I/O • Fat-pipe ports reconfigurable into thin-pipe ports; copper ports support 25/100→10/40 Gb speed downgrade • Dual-core ARM + OpenWare™ management; built-in storage sanitization • SOSA-aligned 6U VPX form factor; air & conduction cooled; rugged Levels 1, C, E

Receives vibration signals from an accelerometer installed on the aircraft engine and monitors engine vibration. Processes real-time vibration signals and converts them into IPS AVG units for output. Developed for localization, achieving 50% cost competitiveness compared to equivalent products. - x1 MIL-STD-1553B - x2 UART(RS-422/485) - x2 Accelerometer sensor - Sample rate : Up to 5,000Hz - Size : 220 x 206 x 52 (mm) - Weight : 1.75Kg - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G - Power : MIL-STD-704F (28VDC, 10W)

This equipment is a thermal imaging system that provides an advanced, lightweight solution for nighttime surveillance. It uses a high-resolution uncooled thermal sensor to detect differences in the thermal signatures of objects across various fields of view. It can also detect a wide range of targets even under adverse weather conditions such as smoke or fog. In addition, it is used for civilian security purposes and for detecting abnormalities in facilities using thermal imaging.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30 amplifies and transmits Camera Link signals in Base/Medium/Full configurations (up to 10 Taps supported) from a camera to a PC frame grabber. Key Features  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Supports 10 Taps cameras.  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Supports PoCL signal bypass (patented).  Features a locking DC power jack (Molex) and SDR connectors.  Compact size compared to previous models.

The SWE450S is a rugged 3U VPX fully managed Layer-2/3 Ethernet switch aligned with the compute-intensive SOSA profile, delivering high-performance 25/100 GbE switching and flexible I/O reconfiguration. • High-performance 2 Tbps switch fabric with wire-speed throughput • Front: up to 2x 100 GBASE-SR4 (MPO); Rear: 25/100 GbE KR4, 100/1000 BASE-T, USB-C, RS-232Reconfigurable fat-pipe to thin-pipe ports, speed downgrading capability • Dual-core ARM + OpenWare™ management, sanitization support • SOSA-aligned (SLT3), rugged air- & conduction-cooled options