Brazing is bonding two or more pieces of metal by means of flowing a filler metal between the joint interfaces at a temperature below the melting point of the base metal. The filler metal, upon cooling to the solid state, forms a strong metallic bond throughout the joined area. Through Dip-Brazing, RF Systems manufacture 1. Brazed Antennas 2. Brazed Waveguides 3. Brazed Divider / Combiner

InnaLabs® high performance ITAR-Free inertial sensor solutions InnaLabs® offers a variety of inertial sensors including tactial grade Coriolis Vibratory gyroscopes (CVG) and navigation grade Quartz servo accelerometers offering our customers unparalleled performance

Receives vibration signals from an accelerometer installed on the aircraft engine and monitors engine vibration. Processes real-time vibration signals and converts them into IPS AVG units for output. Developed for localization, achieving 50% cost competitiveness compared to equivalent products. - x1 MIL-STD-1553B - x2 UART(RS-422/485) - x2 Accelerometer sensor - Sample rate : Up to 5,000Hz - Size : 220 x 206 x 52 (mm) - Weight : 1.75Kg - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G - Power : MIL-STD-704F (28VDC, 10W)

For UAVs requiring both high-accuracy positioning and robust communication, Harxon’s compact, multifunctional helix antennas, such as the HX-CUX005A and HX-CUX618A, provide an integrated solution. Combining GNSS, WiFi, and Bluetooth antennas, these models deliver centimeter-level positioning alongside reliable data transmission across 2.4GHz, 5.8GHz, and 7.2GHz bands. The advanced inter-system design ensures exceptional signal clarity by effectively minimizing mutual interference, making them ideal for demanding UAV applications.

Our products include brake clips and brackets.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

We developed and optimized an object detection and tracking solution tailored for edge environments using Intel Atom platforms with OpenVINO. The system combines MobileNetV3-SSDLite for detection and MobileNetV3-Small for tracking, enabling efficient real-time performance on resource-constrained devices. Through model optimization and inference acceleration, we achieved over 2x improvement in FPS and more than 50% enhancement in inference speed, all while maintaining detection and tracking accuracy. This demonstrates the solution’s suitability for lightweight, low-power edge AI applications

Raptor-16B is one of the highest performing, most innovative and easiest to use night vision goggles ever made with laser detecting function up to 1.06㎛ and much smaller hallo.