This Control Actuation System (CAS) is a guidance system for unmanned flying objects. It consists of three MPS fin actuators that each independently position an aerodynamic fin. The maximum angle of incidence is ±8°, which allows the device to carry out highly precise dynamic manoeuvres. The miniature fin actuators that make up this Control Actuation System are manufactured by MPS Microsystems and were designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, these fin actuators meet strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

We have taken the standard housing configuration of the P1 & P3 mounting dimensions while incorporating true differential pair contacts within the P1 & P3 dimensional constraints. P1 connector housing contains 21 position true differential pair blind mate contacts allowing board designers to carry high density differential pair signals from the LRU via motherboard to daughter-card plug in modules with a single connector P1 type housing.

Designed and manufactured to ensure flawless connection between precision striking functions, even in extreme temperatures, varying altitudes, and impact environments.

The aviation industry was hit hard by the COVID-19 pandemic and is only now beginning to recover. We convened industry leaders from Honeywell Aerospace and asked what carriers can expect in the short-to-midterm as they emerge from the downturn.

STERNA System accurately finds True North in virtually all terrains and regardless of the weather conditions. The performance of STERNA System is not disturbed by gear carried by its operator or if used next to heavy armored vehicles. It remains highly accurate even when deployed on reinforced concrete floors or in dense urban settings. STERNA System operates reliably even in GPS denied environments and does not require the operator to carry any support resources to determine True North. If your mission success depends on the highest level of accuracy and precision, there is no substitute for STERNA System.

Medium size - Shell size 13


The HXB13 Connectors, featuring expanded beam technology, hermaphroditic connection, rugged construction for field deployment have been designed for harsh environment applications such as military tactical communications, avionics, offshore systems, outside broadcast, mining and plant.

The expanded beam technology uses expanded and collimated beams to couple optical fibers without any contact. It could allow for optics to be used in areas that have been quite restrictive due to presence of damage or contamination at the fiber end. Hermaphroditic connector design enables fast deployment by daisy-chaining multiple cable segments.

FEATURES
· Advanced expanded beam technology
· Rugged field deployable fiber optic connector
· Hermaphroditic interconnection
· 2 to 4 Optical Channels for Singlemode or Multimode
· Custom configurations available
· Environmental sealing (IPX8)
· Very high resistance to vibration, shock, environmental effects, dust, and debris

The specifications for vessel design, manufacture and inspection comply with the ASME standard of the USA, as well as the standard of the Korea Gas Safety Corporation. These vessels are manufactured and exported to countries all over the world.

L3Harris combines speed, innovation and flawless execution to deliver the best solutions as quickly as possible.