ICONYX™ is a high-performance tactical grade Inertial Measurement Unit (IMU) for guidance and control applications. ICONYX™ is designed to meet the most demanding environmental conditions with extreme accuracy and reliability. Proven Technology Safran proposes an IMU based on Hemispherical Resonator Gyroscope the HRG Crystal™. This technology is combat proven for 15 years and is extremely accurate, reliable, and is capable of navigating in the most contested GNSS denied environments. HRG Crystal™ Embedded Thanks to the HRG Crystal™, ICONYX™ surpasses the highest performances of its category while keeping the best in class SWaP (Size, Weight, and Power) characteristics of the market. High performance in demanding environments ICONYX™ includes 3 hemispherical resonator gyroscopes HRG Crystal ™ and 3 closed loop MEMS (Micro Electro Mechanical Systems) accelerometers in a compact package. Both Safran’s gyroscopes and Safran’s accelerometers are technological breakthrough.

Slightly smaller than the DCL120, the Model DCL110 red dot sight is designed and developed for the mid-size machine guns including armored vehicles, tanks and helicopters. Its wide lens (85x55mm) allows operators to have fast target acquisition and transition with both eyes open and make them easier to track moving targets from a natural firing position. Ballistic drop compensation ensures the red dot reticle is always on the target for the first round accuracy. Unique Features icon3Integrated recoil compensator retains sight picture on fast moving targets icon3Adapted a wide lens (85x55mm) makes easier to track moving targets. icon3Suitable for platform mounted weapons on armored vehicles, helicopters and boats icon3Compatible with night vision device icon3Different trajectory compensator per NATO 12.7 mm, NATO 7.62 mm and Cannon NATO 20

- Installed on the fuselage or tail to provide flash lighting in a location that does not impede the visibility of position lights - The reflector rotates in an arc. - Flash Rate : 40 to 100 times per minute [cycle] - Effective Intensity : FAA FAR 29.1401 - SAE ARP 5825A

GE Aviation and Safran launched on June 14, 2021, a bold technology development program targeting more than 20 percent lower fuel consumption and emissions c...

The VPX3-C11 which provides a full 3U OpenVPX(VITA 65) is a Single Board Computer(SBC) that combines the power, versatility, cost-effectiveness of the 11th generation Intel Xeon W processor and RM590E PCH chipset with the reliability. VPX3-C11 is based on the Intel Xeon W- 11865MLE CPU that has 8 cores running at max 4.5GHz and providing 32Gbytes of high-bandwidth DDR4 SDRAM. Intel Xeon processor includes an integrated Intel UHD Graphics 11th Gen(32 EU) graphics engine, providing discrete GPU performance with OpenGL for graphicsintensive applications. For storage application VPX3-C11 provides the built-in 80GB SLC NVMe SSD solution via PCIe x4 lanes as well as the external SATA expansion through VPX site. The VPX3-C11 satisfies the demanding applications ranging from tactical aircraft to armoured vehicles to rugged industrial systems, with its rich complement of features and I/O including Intel Graphics, Integrated Platform Management Interface, Gigabit Ethernet, DIO, Serial channels, USB ports and more. Especially VPX3-C11 was designed to keep the pin compatibility with VPX3-C11, previous 6th Generation model in terms of I/O interface signal arrangement.

The compact MD89MW-DroneCAN is a 13mm, metal gear, sub 1 oz micro servo with dual ball bearings, coreless metal brushed motor, and contactless magnetic encoder. This discrete package offers high performance and reliability for robotic and remote, unmanned aerial applications where space and weight are at a premium. Operating via DroneCAN (formerly UAVCAN) control at a wide voltage range from 4.8~7.4 volts, the unique MD89MW actuator produces impressive performance, with torque and speed numbers equal to servos weighing twice as much from just a few years ago. #UAV #UAS #UGV

The mighty Hitec SG33BLT Series servo actuators operate on DroneCAN (formerly UAVCAN), CAN 2.0 A/B, RS485, PWM and TTL command protocols, and feature brushless motors, magnetic encoders, and hardened steel gears. They are also environmentally sealed with an IP67 waterproof case rating. The SG33BLT Series was initially developed for the automotive industry requiring minimal support equipment and wiring, saving unnecessary installation complexity, cost and weight. This same functionality is now enjoying widespread adoption of CAN and DroneCAN systems within the UAV environment. With options for both 9~15-volt and 18~32-volt operations, and DB9SUB, Circular, & Gland Cable connectivity, the SG33BLT Actuator Series is sure to have a solution for your needs. #UAV #UAS #UAM #UGV #UUV #USV