CPPA Procedure : 1. Requirement Analysis for Customer's parts Purchasing 2. Parts Purchase Negotiations 3. Parts Purchasing Management 4. Component Reliability Testing 5. Space Parts Documentation Support 6. Delivery to the Customer

- Power supply and control for the driver camera and thermal camera - Video signal selection and display: driver camera & thermal camera

Fast & precise 5-axis exceeds expectations • 15000, 20000 r/min high speed spindle • B-axis/C-axis 0.0001 degree control as standard • Tool change time (C-T-C) 3.8s, 28% faster than previous model • Increased X/Y/Z-axis rapid traverse speed & acc./dec. • Cooling functions as std. on spindle, motor/LM guide/ball screw (X/Y/Z), C-axis table motor • Integrated thermal compensation systems for spindle and structure FURTHER INCREASED MACHINING CAPACITY • Ø630mm dia. 2-axis tilting table, 26% increased compared to previous model • Max. Ø600 x H500mm machining area, 32% increased compared to previous model • Max. 400kg table load capacity with stable table support structure • X/Y/Z axis travel distance 650/520/480mm, up to 20% increased compared to previous model EASY ACCESS, EASIER OPERATION • Easy setup of workpieces with 580mm distance between operator and table center • Easy tool exchange by placing the tool magazine door on the front and applying a tool removal device (Auto Kicking Device) • Improved chip disposal capability with enhanced coolant flood & flushing functions • Grease lubrication system • Compact integrated automation system (AWC)

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

Revolutionary DFOG Technology Boreas takes Fibre Optic Gyroscope (FOG) technology into the next generation with new, patent-pending Digital FOG (DFOG) technology, developed over 25 years with 2 research institutions. This revolutionary DFOG technology combines a specially designed closed-loop optical coil with advanced spread spectrum digital modulation techniques that have never been used in a FOG before. The resulting DFOG offers dramatically improved accuracy, stability, and reliability with significantly reduced size, weight, power, and cost.

Our technology and quality have been recognized internationally and regionally as we supply products manufactured based on AS9100, NADCAP special process approval to global companies lockage in domestic and overseas.

The ECL4000 is an LTE outdoor base station developed for the U.S. CBRS market, providing a service radius of several kilometers and enabling seamless private LTE network service.

The AI Inspection Rover is capable of autonomous driving indoors and outdoors, obstacle avoidance, high-resolution image acquisition, aircraft underbody inspection, and platooning. Its low-height design allows it to pass under the aircraft, and with its zero-turn function, it can execute missions more efficiently. Additionally, it can drive slopes of up to 10° and overcome bumps of up to 30mm.