Original compact design and long-term production know-how. System reliability and overall competitiveness.

- Compact size with built-in drive, position sensor, DC motor and gear box - Better durability & faster speed under similar rated load comparing to 12Lf series thanks to the bigger 17mm diameter DC motor - Position, current and speed control along with position & current feedback - Easy digital extended I/O control through 4 x Expansion I/O ports (No coding) - 27/37/50/87mm(*) stroke option (*): Each 3mm stroke can be added when adjusting the long stroke limit through Total Manager software. Rated load of 17N~70N depending on the lead angle for each stroke (Speed is inversely proportional to the rated load, so the higher the rated load, the slower the speed.) - RS-485 MODBUS-RTU protocol applied (IR open protocol is not provided) - Action feature which enables user’s motion save & run

B Series incorporates the highly reliability Hypertac® hyperboloid contact which provides optimum performance in harsh conditions such as extreme mechanical shock and high mating cycles.

Compact & Lightweight Design for Quick Assembly & Disassembly, Maximizing Portability. Small Fixed-wing Drone Specialized for Aerial Surveying, Surveillance, and Reconnaissance, ensuring Optimal Operation Without Space Constraints. Flight Time : 90min (No Payload) / Cruise Speed : 20m/s, 28m/s (Max) / MTOW : Under 8.6kg Aircraft Size : 2432x1581x403mm / Max Payload : 500g / Range : 3km (Varies by Communication Equipment) / Weight : 8.1kg (With battery, No payload) Application : Aerial Surveying, Reconnaissance, High-Resolution Picture/Video, Payload Drop

- Urban drones specialized in surveillance/spatial information/disaster safety/facility survey - Completed localization of core components! Equipped with encryption KCMVP Dimensions (WxLxH) : Flight / 360x360x160mm(h) Folding / 260x260x160mm(h) Airframe Weight : 2kg or less (max take-off weight) GNSS : RTK / GNSS (SBAS supported) Flight Time : 30 minutes

Ultisense™ is Safran Vectronix’s line of high-performance OEM sensing modules, including ultra-compact Laser Rangefinders (LRF) and Digital Magnetic Compasses (DMC). Designed for seamless integration into military and civilian systems, they offer exceptional accuracy, ruggedness, and Swiss precision. LRF modules measure distances up to 30 km with ±1 m accuracy, while DMC modules provide azimuth accuracy down to 0.25°, even under extreme shock and environmental conditions.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Woori DS Co., Ltd. has developed firmware for a cooling and heating air conditioning system that performs all controls, fault diagnosis and communication for heating and cooling control and positive pressure control inside an armored vehicle, and developed an inverter control device capable of controlling communication with the armored vehicle body system and monitoring error situations. We are developing products based on the best technology and competitiveness to satisfy customer requirements for electrical equipment required for armored vehicles. In addition, we have developed an air conditioning system blower durability test device that can test the durability of air conditioning blowers, and we have secured test and evaluation technology for blower durability by checking blower errors and performing cycle management. By continuously securing innovative technologies in the defense industry, we are expanding our electronic device development business to deliver new value and impress customers with the highest quality and trust from product design, development, and mass production.