Inserts are used in the aerospace industry in lightweight sandwich panels and are then bonded. The panels can then be screwed or various components can be fastened. However, the manual process has several disadvantages: Enormous expenditure of time for the manual filling of several thousand inserts, high material waste due to relaxation of the material, and high material costs through the use of cartridges. ViscoTec can map the filling process automatically. The dispensing process is absolutely precise. A significant amount of material can thus be saved. In addition, material can be supplied from large containers, which in turn lowers purchase prices. Another important advantage: As a rule, no new specifications have to be made since no changes are made to the actual process.

The FORCE2C is a rugged 3U VPX flight-certifiable mission computer featuring a QorIQ T2081, full avionics I/O, safety certification artifacts (DO-254/178C up to DAL A), and FACE compatibility. • QorIQ T2081 (1.8 GHz, 4 cores), SBC314C SBC: 4 GB DDR3L, 16 GB SSD, PCIe Gen 2 ×4 • Avionics I/O: ARINC 429 (8 TX, 10 RX), MIL-STD-1553 (4), discrete I/O, serial (RS-422), GbE, USB, RS-232/422 • Rugged conduction-cooled build; MIL-STD / DO-160 rated; −40 °C to +71 °C • DO-254/DO-178C certification artifacts available (DAL D to A) • FAA certified (SOI complete), FACE compliant

ACE is a comprehensive ecosystem of smart apps designed to streamline the entire aircraft and cabin interior configuration process. From aircraft manufacturers to buyers, leasing companies, and interior suppliers, ACE enables seamless management within a single, fully digital workflow.​ With ACE, you can enhance efficiency, reduce errors, and ensure every step of the configuration process is done accurately and on time.

The first step toward armed helicopters The Bomb Rack Unit (BRU) is a device installed on a helicopter’s Stub-wing to mount various armaments such as rocket launchers and air-to-ground missiles, and it consists of a Pylon Unit and a Bomb Rack Unit. CTLA’s Bomb Rack Unit is equipped with a Boresight function that allows vertical (up/down) and horizontal (left/right) angle adjustments, and a solenoid-actuated free-fall weapon release (Jettison) method is applied. CTLA’s Bomb Rack Unit has passed the system tests for the Light Armed Helicopter (LAH) and received suitability certification, and it is currently in mass production.

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. Linear Acceleration Compensation Certus Mini uses an innovative algorithm to compensate for linear accelerations. This allows Certus Mini to maintain accurate roll and pitch through short term linear accelerations that typically cause significant errors in competitors systems. For long term linear accelerations Certus Mini supports the addition of an external GNSS receiver for full acceleration compensation. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

It is designed to be suitable for difficult environments and can be applied to high torque and angle control. Applications are Missile defense, Torpedoes, Anti-drones system, Underwater drones.

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30 amplifies and transmits Camera Link signals in Base/Medium/Full configurations (up to 10 Taps supported) from a camera to a PC frame grabber. Key Features  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Supports 10 Taps cameras.  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Supports PoCL signal bypass (patented).  Features a locking DC power jack (Molex) and SDR connectors.  Compact size compared to previous models.

Engine Parts, Overhaul