Contribute the Enhancement of Armed Forces with Continuous Technology Development Designed for replacing the Republic of Korea Army(RoKA)’s aged attack helicopter (500MD, AH-1S), the LAH(Light Armed Helicopter) Project is the one that aims to develop a cutting-edge armed helicopter suitable for the modern battlefield. Through the synergy of maximizing commonality in subsystems and parts with LCH(Light Civil Helicopter), KAI will reduce the development, production, and sustainment cost ultimately to be a bridgehead for a global helicopter market. The first flight of LAH was successfully conducted in 2019. KAI aims to complete the development of LAH in 2023.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

The KX1-3046 is an X-band high-power MMIC amplifier fabricated on the GaN-on-SiC process. It operates from 8.0 – 10.5 GHz and typically provides 30W saturated output power with power-added efficiency of 46%. The KX1-3046 can support military and commercial radar systems. It is matched to 50Ω with integrated DC blocking capacitors on both RF input and output ports. The KX1-3046 is 100% DC and RF tested on-wafer. It is available in chip form. **Key Features** - Frequency Range: 8.0-10.5GHz - Small Signal Gain: 28dB - High Pout: 30W - High PAE: 46% - DC bias: Vd=28V @Idq=0.6A - Pulsed Vg: PW=100µs, DC=10% - Chip size: 2.95x3.1x0.1mm  

This equipment is a thermal imaging system that provides an advanced, lightweight solution for nighttime surveillance. It uses a high-resolution uncooled thermal sensor to detect differences in the thermal signatures of objects across various fields of view. It can also detect a wide range of targets even under adverse weather conditions such as smoke or fog. In addition, it is used for civilian security purposes and for detecting abnormalities in facilities using thermal imaging.

Based on the T-50 trainer’s superior performance and an armament storing capability, the FA-50 aircraft is further developed and upgraded with Tactical Data Link, Precision Guided Munitions, and Self Protection subsystem. Featuring a fighter jet-class flight performance, the FA-50 aircraft has been deployed and operated in the Republic of Korea Air Force (ROKAF) since 2013.

SURI-I is a lightweight and compact sized thermal weapon sight, optimizing firing capabilities for various kinds of rifles in the day and night time condition. It could be supported by HMD(Wireless Goggle) for indirect looking fire like corner shot to secure targets in hiding position.

The COX640AV embodies COX’s cutting-edge cooled MWIR imaging technology, delivering unparalleled performance for the most demanding applications. Its 640x512 resolution and 15μm pixel pitch InSb sensor achieve thermal sensitivity of less than 20mK, ensuring crystal-clear imaging for precise analysis. Capable of operating across a wide temperature range, the COX640AV supports multiple imaging modes and advanced processing functions including AGC, NUC, and customizable color palettes. This ensures adaptability to a variety of mission-critical environments such as defense, aerospace, scientific research, and industrial inspection. In addition to superior imaging quality, the COX640AV is designed for reliability and operational readiness. With rapid image stabilization after startup and robust construction, it performs consistently in harsh environments where stability is non-negotiable. Its combination of cooled MWIR precision, advanced processing features, and rugged design positions the COX640AV as a trusted solution for customers who require accuracy, speed, and durability. By integrating COX’s proprietary calibration expertise, it not only provides outstanding real-time imaging but also guarantees long-term reliability and service continuity.

Original compact design and long-term production know-how. System reliability and overall competitiveness.