Built with a rugged design and clear display, the TACNAV UMD offers: Highlights Active dot-matrix design, delivering unparalleled flexibility User-friendly interface with easy-to-read icons, messages, and pop-up menus Features Generation III NVG (night vision goggle)-compatible Four “soft keys” for easy operation Interchangeable with both Commander’s and Driver’s Displays, reducing logistics and cost Military standard approved for outstanding performance and reliability Ideal for integration into digital Battle Management Systems Compatible with all existing and future EMCORE TACNAV systems Applications Military vehicle requiring a user-friendly interface for its tactical navigation system The TACNAV UMD is controlled by the Arms Export Control Act (Title 22, USC Sec 2751 et seq.) and the International Traffic in Arms Regulations, ITAR 22 CFR 120-130, and may not be exported from the United States or disclosed to a foreign person in the United States except as authorized by those regulations.

KVPX+ Series is an embedded interconnect system that provides unrivaled performance in harsh environments while adapting to the VITA standard design requirements. KVPX+ Series is a shielded, high-density, high-speed, modular interconnect system optimized for differential pair architectures on a 1.8mm x 1.35mm grid.

Solution Overview The AI-Based Command Decision Support System, "KWM," identifies battlefield targets and recommends optimal weapon system combinations. It supports end-to-end "Sensor-to-Shooter" execution for rapid, accurate, and efficient engagement and command decision-making. Main Features Identifies targets on the battlefield using integrated sensors and data Recommends the most effective attack strategies for both reconnaissance and attack missions Provides command decision support through real-time analysis and visualization Suggests and allocates optimal target formations and strike assets Supports on-site command and control with a user-friendly interface Key Advantages Enables quick, accurate, and efficient engagement of enemy targets Automated recommendation of attack strategies and allocation of strike resources Real-time synchronization between reconnaissance and attack kill webs Direct connection from detection to strike (Sensor-to-Shooter capability) Increases operational efficiency and decision-making accuracy in complex battlefield environments Applied Cases Successfully piloted in the Army Tiger Boost Project in 2024 Used for command decision-making and efficient allocation of attack resources in live military scenarios

GIMPO has proactively driven the introduction of UAM to alleviate the traffic congestion and secure future growth engines, thereby preparing for the period of 700,000 GIMPO residents. Equipped with both air routes and infrastructure, GIMPO is optimal location to expand business and generate results in the uncharted UAM market with minimal risk. we will prepare for a UAM-centered future city through the development of the 'GIMPO ENVIRONMENTAL REGENERATION INNOVATION COMPLEX' and 'GIMPO HANGANG 2 COMPACT CITY'. Unlock new opportunities in GIMPO.

Temperature Calibrated Pressure Sensors The Air Data Unit features very high accuracy absolute and differential pressure sensors. These are factory calibrated over a wide temperature range to further increase measurement accuracy and provide the best air data possible through varying conditions. Power Up Self-Calibration On top of factory temperature calibration, every time the air data unit powers up, it performs a self excitation calibration to adjust for small deviations of bias and scaling error. This allows the system to compensate for calibration aging and means that it never needs to be returned to the factory for recalibration. Reliability The Air Data Unit is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance. Its communication interface is optically isolated and the hardware is designed and tested to MIL spec.

i3system’s line scanning X-ray detector platform, XID-C15DP/XID-C24DC, is a high performance and cost effective solution for dental panoramic, cephalometric applications. i3system’s direct type sensor ensures the most sharp images among the current products in the market. XID series is designed for compact size and easy installation. High DQE(Direct Quant㎛ Efficiency) enables high performance at lower dose of X-ray. Introduction Indirect type X-ray detector uses the scintillator and the photo-diode(CCD or CMOS sensor) for conversion of the X-ray into the light and for taking images espectively. But the light scatters and goes extinct during it passes through the scintillator and reaches to the CCD or CMOS sensor. As a result, it is inevitable to get blurred image. In the mean time, XID C15DP, direct type detector, converts X-rays into electronic signals directly without conversion process of light. Because X-ray is not converted into light, it provides much sharper images than indirect type detector. XID C15DP is designed to compact for easy installation. It provides Gigabit Ethernet port on the detector for easy configuration. Instead of Gigabit Ethernet, camera link or optical interface can be provided according to requirements of users.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

The SWE450S is a rugged 3U VPX fully managed Layer-2/3 Ethernet switch aligned with the compute-intensive SOSA profile, delivering high-performance 25/100 GbE switching and flexible I/O reconfiguration. • High-performance 2 Tbps switch fabric with wire-speed throughput • Front: up to 2x 100 GBASE-SR4 (MPO); Rear: 25/100 GbE KR4, 100/1000 BASE-T, USB-C, RS-232Reconfigurable fat-pipe to thin-pipe ports, speed downgrading capability • Dual-core ARM + OpenWare™ management, sanitization support • SOSA-aligned (SLT3), rugged air- & conduction-cooled options