옥외 스펙트럼 모니터링 및 위치 탐지 솔루션 R&S®UMS400 범용 모니터링 시스템은 8kHz에서 8GHz까지 스펙트럼 모니터링 및 방향 탐지를 지원합니다. 또한, R&S®CS-MC20 마이크로파 컨버터를 통해 최대 20GHz까지 확장할 수 있습니다. 무선 통신 서비스의 주파수 범위가 점점 증가함에 따라 최대 8GHz, 경우에 따라 최대 20GHz까지 모니터링 스테이션이 필요합니다. 일반적으로 가장 높은 감도를 위해 케이블 손실을 최소화하기 위해 안테나 근처에 모니터링 센서를 설치해야 합니다. R&S®UMS400과 R&S®CS-MC20 모두 옥외 하우징 옵션을 통한 야외 설치가 가능합니다.

It is especially suited for demanding applications, which require reliable performance, such as missile seeker gimbal stabilization, where small size and low power consumption is required, while in a low cost design that is also ideally suited for high volume commercial applications. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec, ±200°/sec, ±400°/sec Input Voltage + and - 5.0 Vdc Bandwidth 110 Hz Output Noise < 005°/sec/√Hz Scale Factor Accuracy ±1% Nominal Features Dual Axis Capabilities in Small Form Factor Miniature Size: Only 25gm.(1.05” x 0.71” diameter) Hermetically Sealed In Stainless Steel Cylinder High Reliability DC Input/High-Level DC Analog Output Low Cost Applications Tank Turret Stabilization Missile Targeting Platform Stabilization Antenna Stabilization Camera Stabilization Spacecraft

ARDRONIS는 로데슈바르즈의 드론 대응 솔루션 제품군입니다. 복합 시스템 접근 방식으로 고객이 각각의 고유한 최종 사용자 요구사항에 따라 악의적이고 비협조적 위협을 탐지-식별-위치 확인-추적-검증-대응할 수 있습니다. ARDRONIS가 RC 드론 활동을 탐지하면 드론 신호의 유형을 자동으로 분류하고, 드론의 방향과 조종자를 확인한 다음, 드론이 목표물에 도달할 수 없도록 무선 제어 링크를 차단합니다. 대부분의 상업용 원격 제어 드론은 최신 주파수 가변 파형인 FHSS(Frequency Hopping Spread Spectrum)를 통해 제어합니다(업링크). 기타 일반적인 드론 유형은 Wi-Fi을 통해 제어합니다(업링크). 드론에서 전송하는 신호(다운링크)는 일반적으로 FHSS, Wideband 또는 Wi-Fi 신호입니다.

The FORCE2C is a rugged 3U VPX flight-certifiable mission computer featuring a QorIQ T2081, full avionics I/O, safety certification artifacts (DO-254/178C up to DAL A), and FACE compatibility. • QorIQ T2081 (1.8 GHz, 4 cores), SBC314C SBC: 4 GB DDR3L, 16 GB SSD, PCIe Gen 2 ×4 • Avionics I/O: ARINC 429 (8 TX, 10 RX), MIL-STD-1553 (4), discrete I/O, serial (RS-422), GbE, USB, RS-232/422 • Rugged conduction-cooled build; MIL-STD / DO-160 rated; −40 °C to +71 °C • DO-254/DO-178C certification artifacts available (DAL D to A) • FAA certified (SOI complete), FACE compliant

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

Instead of relying on limited data center infrastructure or building from the ground up, AWS Modular Data Center delivers a cost-effective, self-contained modular data center solution that supports customers’ data center scale workloads. With this offering, defense customers can securely store, analyze, and interpret petabytes worth of data in real-time to gain military advantage in the most isolated environments.

InspecX is a next-generation autonomous swarm inspection system for aircraft. It is addressing challenges in the $100B global aviation maintenance market. Airlines face a shortage of certified technicians, with Boeing projecting demand for over 700,000 by 2044. Aircraft-on-ground (AOG) incidents cost $10,000–$150,000 per hour, making downtime reduction critical. InspecX uses swarm coordination and LiDAR-based SLAM to perform safe inspections in GNSS-denied or indoor environments. It reduces required technicians from 9 to 3 and inspection time from 10 hours to 3, achieving over 50% cost savings for large aircraft. Beyond efficiency, InspecX helps airlines avoid AOG losses, accelerates maintenance cycles, and improves airworthiness. By maximizing fleet readiness and ensuring reliable operations, it provides a scalable, future-proof solution. InspecX is positioned to become the new global standard for aviation safety and maintenance in the era of intelligent mobility.

Oil filter/transfer cart : Mobile fueling cart that supports oil filtering, flow rate check, and transfer functions oil system skid : Each part that enables oil transfer, filtering, flow rate check, and refueling in the oil tank is compactly configured with a skid for easy use and installation of the system.