The AB-U10 is a 10 kg-class vectored-thrust eVTOL. With a wingspan of 1.8 meters, it features a maximum take-off weight (MTOW) of 10 kg, a range of over 10 km, a payload capacity of 2 kg, and a maximum speed of 160 km/h. The AB-U10 is a lightweight mission aircraft specifically designed for anti-drone operations, equipped with an integrated net gun system.

JEFF FIREFLY is a perfect sunglasses for protecting the eyes and preventing reflection during daily or guard work. The glasses block wind and dust to protect the eyes. The Anti-Scratch & Anti-Fog coated polycarbonate lenses give you UV protection below 400nm. The TR-90 frame offers reliable comfort during use, as it is resistant to temperature changes even in extreme conditions such as deserts or harsh climates. Also, JEFF FIREFLY is comfortable to wear for a long time due to its lightweight fitting.

NILO® Alloy 36 Bars-Sheets and Plates-Tubes and Pipes-Strip-Wire NILO® Alloy 48 Bars-Strip INCONEL® Alloy 230 Bars-Sheets and Plates INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 Bars-Sheets and Plates INCONEL® Alloy X-750 Bars-Sheets and Plates INCONEL® Alloy HX Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy A-286 Bars-Sheets and Plates NIMONIC® Alloy 75 Bars-Sheets and Plates NIMONIC® Alloy 80A Bars-Sheets and Plates NIMONIC® Alloy 90 Bars-Sheets and Plates-Strip-Wire NIMONIC® Alloy 263 Sheets and Plates UDIMET® Alloy 188 Bars-Sheets and Plates UDIMET® Alloy L-605 Bars-Sheets and Plates Waspaloy® Sheets and Plates Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 (6Al-4V) Bars-Sheets and Plates Material no. 1.4545.4 / 15-5PH Bars Material no. 1.4548.4 / 17-4 PH Bars Material no. 1.4546.9 Bars

Contribute the Enhancement of Armed Forces with Continuous Technology Development Designed for replacing the Republic of Korea Army(RoKA)’s aged attack helicopter (500MD, AH-1S), the LAH(Light Armed Helicopter) Project is the one that aims to develop a cutting-edge armed helicopter suitable for the modern battlefield. Through the synergy of maximizing commonality in subsystems and parts with LCH(Light Civil Helicopter), KAI will reduce the development, production, and sustainment cost ultimately to be a bridgehead for a global helicopter market. The first flight of LAH was successfully conducted in 2019. KAI aims to complete the development of LAH in 2023.

Our LiDAR uses a custom-designed laser that separates 1064 nm and 532 nm wavelengths from a single source, with two dedicated receivers capturing each set of data independently. Inside the system, the linear laser beam is refracted at a 10-degree angle through a prism to enable circular scanning. An RF module is also integrated for real-time equipment status monitoring. From circuit board design to component selection, every part of this system was developed in-house by multiple institutions. As a result, we have successfully eliminated reliance on foreign technology.

- Compact size with built-in drive, position sensor, DC motor and gear box - Better durability & faster speed under similar rated load comparing to 12Lf series thanks to the bigger 17mm diameter DC motor - Position, current and speed control along with position & current feedback - Easy digital extended I/O control through 4 x Expansion I/O ports (No coding) - 27/37/50/87mm(*) stroke option (*): Each 3mm stroke can be added when adjusting the long stroke limit through Total Manager software. Rated load of 17N~70N depending on the lead angle for each stroke (Speed is inversely proportional to the rated load, so the higher the rated load, the slower the speed.) - RS-485 MODBUS-RTU protocol applied (IR open protocol is not provided) - Action feature which enables user’s motion save & run

Stable operation through precise current/temperature control for up to 4 channels. Customer-tailored GUI, real-time monitoring, and remote control.