Safran’s TG600 is a 600 kW hybrid-electric turbogenerator—derived from the Arrano turboshaft and paired with GENeUS generators—designed to serve as the core propulsion component for Electra’s nine‑passenger eSTOL aircraft.

The SBC3612D is a rugged 3U VPX single board computer aligned with the compute-intensive SOSA profile, delivering high-performance processing with the Intel® Xeon® D-2775TE 16-core processor and flexible expansion capabilities. • Supports up to 64GB DDR4 SDRAM and 480GB NAND Flash (NVMe SSD) • Offers 100GbE and 10/25GbE data plane and control plane support • Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA for enhanced security

CP-10K (FIRE CONTROL COMPUTER) The computer for fixed-rate control consists of five processors for main control, communication, casting, console control, and shared memory, and performs the function of controlling guided missiles through the interface.

In addition to stocking common grades, shapes and sizes, PASU has a full inventory of nonstandard sizes. Progressive’s multiple value-added processing capabilities provide the ability to supply near-net products resulting in reduced machining time. From 2 stocking locations (Hartsville, South Carolina & Las Vegas, Nevada) the company efficiently supports the North American market, with close proximity to international airports and major shipping ports on the east & west coast of the USA providing exceptional service to the global market. Progressive’s AS9100D Certified quality system is complemented with many major OEM Approvals including Pratt & Whitney - LCS. Specialty products include round bar, flat bar, plate & forgings in the following alloys: 17-4PH & 15-5PH 13-8MO 13-8 Supertough® 4340M (300M), 4330M, 4340 VAR Cronidur 30® Custom 455® & Custom 465® 440c & 440c VAR Value added processing capabilities include: Production cutting up to 22" diameter Plate processing up to 24" x 72" x 170" Waterjet cutting & near-net shape processing Grinding, trepanning & gun drilling Heat treating, destructive & non-destructive testing

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

Designed to meet US army specifications 360 degree soft armor protection Single-handed 4-wire cutaway Antibacterial/FR treated padded spacer mesh system Semi-rigid, lace-adjustable, external MOLLE cummerbund PALS webbing for MOLLE attachment Zipper for MV Assaulter's Zip-On Back Panels Increased structural integrity and reduced rear deformation Compatible with our entire accessories line Soft armor included Composition Material : 500D Cordura® + ARAMID / PV® Size : Small : 8.5" x 11.5" Plate Pocket Medium : 9.3" x 12.3" Plate Pocket Large : 10" x 13" Plate Pocket XLarge : 10.9" x 13.8" Plate Pocket Colors MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

Portable thermal target with day/night combined shooting training. Application of advanced thermal sensing technology to realistically reproduce various combat situations to improve the user's shooting ability. Heat generation performance can be achieved through multiple fires, increasing shooting training efficiency and reducing operational costs.

Designed on MPS Microsystems’ modular optomechanics platform, the High-Speed Coaxial Lens Actuator delivers custom-engineered, micron-level alignment in a footprint of just 170 × 87 × 45 mm. Two brushless motors drive lens holders (Ø 12.7 mm) that move in the same precision-machined bore, guaranteeing perfect coaxiality throughout the 3.75 mm stroke and no shimming or iterative alignment required. The closed-loop cam mechanism runs friction-free, ensuring a maintenance-free stage that can be used in laser machining heads, spectrometers or 3-D scanners and keeps working for millions of cycles. Most importantly, stroke, motor, encoder and mounting interfaces of this high-speed coaxial lens actuator can all be customized to fit your needs with regards to optical and space constraints.