Collects data from various sensors within the aircraft system, converts it into the required format, and transmits it to the mission computer or flight control computer. Converts control commands received from the mission computer or flight control computer and relays them to sensors and other peripheral devices. Supports system control functions, monitors the status of key systems, and provides feedback. Achieves 70% cost competitiveness compared to equivalent-performance products. - x2 MIL-STD-1553B - x2 UART (RS-422/485) - x24 Analog input interfaces - x8 Analog output interfaces - x64 Discrete input interfaces - x40 Discrete output interfaces - Size : 270 x 270 x 62.2mm - Weight : 2.5Kg - Power : MIL-STD-704F (28VDC, 10W) - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G

High-Reliability Space-grade SRAM memory : 1. Density : 16Mbit (512k x 32bit) SRAM 2. Package Type : 100 Pin CQFP (Ceramic Quad Flat Package) 3. MIL-PRF-38535 Class V Qualified 4. Operating Temperature : -40℃ ~ +125℃ 5. Radiation : TID > 102 krad, SEL LETth > 80.4MeVcm2/mg@ 85℃

The AB-M1300 is a 1.3 ton-class eVTOL AAM. With a wingspan of 10 meters, the AB- M1300 is a crewed–uncrewed hybrid aircraft aiming for commercialization in 2028. Falling under the Light Sport Aircraft (LSA) certification category, it can carry up to two occupants, reach a maximum speed of 400 km/h, operate for two hour of flight time, has a maximum take-off weight (MTOW) of 1.3 tons, and a payload capacity of 250 kg. The AB-M1300 is designed for a variety of missions, including mid-mile logistics, personal leisure use, and pilot training.

An indigenous combat system to be installed on the next-generation Korean Destroyer (KDDX), developed as a localized alternative to the Aegis Combat System. It is a fully integrated software and hardware suite that controls all assets—including power systems, sensors, and weapons—to conduct naval operations. - Compliant with MIL-SPEC standards (shock, vibration, temperature/humidity, EMI/EMC) - Incorporates connector assemblies to enhance maintainability

1. Filler Metal Name Material/Alloy AWS W-No. ISO-No. Nickel 61 Ni A5.14 ERNi-1 2.4155 SiNi2061 MONEL® 60 Ni-Cu A5.14 ERNiCu-7 2.4377 SNi4060 MONEL® 67 Cu-Ni A5.7 ERCuNi 2.8037 SCu7158 INCONEL® 72 Ni-Cr A5.14 ERNiCr-4 SNi6071 NC 80/20 Ni-Cr 2.4639 INCONEL® 82 Ni-Cr A5.14 ERNiCr-3 2.4806 SNi6082 INCONEL® 622 Ni-Cr-Mo A5.14 ERNiCrMo-10 SNi6022 INCONEL® 625 Ni-Cr-Mo A5.14 ERNiCrMo-3 2.4831 SNi6625 INCO-WELD® 686-CPT Ni-Cr-Mo A5.14 ERNiCrMo-14 SNi6686 INCO-WELD® 725NDUR Ni-Cr-Mo A5.14 ERNiCrMo-15 SNi7725 INCO-WELD® C-276 Ni-Cr-Mo A5.14 ERNiCrMo-4 2.4886 SNi6276 INCONEL® 52 Ni-Cr-Fe A5.14 ERNiCrFe-7 SNi6052 INCONEL® 52M Ni-Cr-Fe A5.14 ERNiCrFe-7A INCONEL® 92 Ni-Cr-Fe A5.14 ERNiCrFe-6 SNi7092 INCONEL® 617 Ni-Cr-Co-Mo A5.14 ERNiCrCoMo-1 2.4627 SNi6617 NILO® CF36 Ni-Fe INCOLOY® 65 Ni-Fe-Cr A5.14 ERNiFeCr-1 SNi8065 INCONEL® 718 Ni-Fe-Cr A5.14 ERNiFeCr-2 2.4667 SNi7718 Titanium Grade 1 Ti A5.16-90 ERTi-1 Titanium Grade 2 Ti A5.16-90 ERTi-2 Titanium Grade 5 Ti-Al-V A5.16-90 ERTi-5 Titanium Grade 7 Ti-Pd A5.16-90 ERTi-7 2. Electrodes Name Material/Alloy AWS W-No. ISO-No. Nickel 141 Ni A5.11 ENi-1 2.4156 ENi2061 MONEL® 190 Ni-Cu A5.11 ENiCu-7 2.4366 ENi4060 MONEL® 187 Cu-Ni A5.6 ECuNi 2.0838 ECu7158 INCO-WELD® A Ni-Cr-Fe A5.11 ENiCrFe-2 2.4805 ENi6092 INCONEL® 152 Ni-Cr-Fe A5.11 ENiCrFe-7 ENi6152 INCONEL® 182 Ni-Cr-Fe A5.11 ENiCrFe-3 2.4807 ENi6182 INCONEL® 112 Ni-Cr-Mo A5.11 ENiCrMo-3 2.4621 ENi6625 INCONEL® 122 Ni-Cr-Mo A5.11 ENiCrMo-10 ENi6022 INCO-WELD® C-276 Ni-Cr-Mo A5.11 ERNiCrMo-4 2.4887 ENi6276 INCO-WELD® 686CPT Ni-Cr-Mo A5.11 ERNiCrMo-14 ENi6686 INCONEL® 117 Ni-Cr-Co-Mo A5.11 ERNiCrCoMo-1 2.4628 ENi6617

The SC-DSPRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the DSP282A. When the DSP282A board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-DSPRTM board into the back of the Backplane. The DSP282A board consists of two computing nodes. To support this, Ethernet, USB, MMCX, and mini-HDMI ports are allocated to each node, and synchronization signal input ports can also be used simultaneously on both nodes.

EMCORE’s TACNAV Light is a field-proven digital compass-based battlefield navigation system. Type-classified by U.S. SOCOM and designed specifically for non-turreted vehicles, TACNAV Light offers: Highlights GPS backup and enhancement, vehicle position, hull azimuth, and steer-to/cross-track error displays One of the lowest cost tactical navigation systems available Improved operational effectiveness and increased force OPTEMPO Application Features Compass for the highest degree of accuracy and unjammable position and navigation information Dead reckoning and odometer interface for accuracy to within 2-3% of distance traveled Digital interface with Battle Management Systems for improved situational awareness Uses TACNAV Universal Multilingual Display (UMD) capable of presenting data in virtually any language Applications Light military vehicles The TACNAV Light is controlled by the Arms Export Control Act (Title 22, USC Sec 2751 et seq.) and the International Traffic in Arms Regulations, ITAR, 22 CFR 120-130, and may not be exported from the United States or disclosed to a foreign person in the United States except as authorized by those regulations.

The ACTUS® ARKS5255 (5-25X, 56mm FFP) Long Range Riflescope is designed for precision and durability, meeting the needs of professional users across a wide range of environments. Equipped with a First Focal Plane (FFP) optical design, it enables fast and accurate target coverage at any magnification level. The illuminated reticle ensures smooth and clear targeting in low-light conditions, such as during dawn or dusk. Whether in challenging operational environments or critical moments, the ACTUS® ARKS5255 is the ideal riflescope for users seeking superior performance when it matters most.