Titanium Grade 1 Strip Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 ELI Bars-Sheets and Plates Titanium Ti-6Al-7Nb Bars

The L-band 8-channel filter bank receiver module is equipped with eight internal filter bank channels, enabling improved reception performance by isolating specific sub-bands within the receive frequency range. A 100W limiter at the input stage protects the receiver from high-power signals, and the module offers a low noise figure of 3.0 dB or less. The input P1dB for the receiver is -20 dBm, and the module features a built-in path self-test function.

The ultra-low noise SRO-5680 GPS/GNSS-disciplined rubidium oscillator (GPSDO) features an EMI-shielded, rugged packaging, while integrating complex synchronization functionality all in one low-cost, super-small package. It is compatible with the FEI-5680 Rb model and utilizes the SmarTiming+® technology to provide a host of integrated GPS/GNSS disciplining and timing features. The SRO intelligently synchronizes, disciplines, and controls any primary 1PPS reference signal, such as GPS/GNSS, Cesium, Hydrogen Maser, and T1/E1, at cutting-edge 1ns resolution. Its slim and rugged packaging and ultra low noise features make it greatly suitable for next gen SATCOM, airborne and other stringent MIL applications. Applications: Mobile & wired telecom/datacom infrastructures Military communications, SATCOM & surveillance systems High precision instruments Time & frequency systems

The D56M differential pressure switch provides high precision measurement across a wide range of low-differential pressure conditions in a package smaller than other units of comparable capability. The membrane senses changes between the “high” and “low” pressure inlets while offering excellent repeatability and high cycle life. Optional hermetically sealed contacts mean the D56M can be well suited when vapor ignition is a concern.

Typical uses include airflow control plenums.

For a similar switch with a higher resistance to shock and vibration, refer to the D16M

For qualification information, please consult the sales or engineering departments.

Features

Intended for gaseous media
Environmentally sealed with optional hermetically sealed contacts
Proven diaphragm and leaf spring technology for high cycle life

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

A VGA (640×480) LWIR (8–12 µm) uncooled micro-bolometer module with 12 µm pixel pitch and NETD ≤ 50 mK, paired with an F1.0, 10.7 mm EFL lens delivering H42° / V31.5° / D52.5° FOV. It streams at 30 Hz in either UVC (USB-C, 5 V) or GMSL1 (FAKRA, 12 V), with power consumption < 1.9 W. The compact, lightweight housing (30×30×58.9 mm for UVC; 30×30×70.9 mm with FAKRA for GMSL1; IP65; −40 °C to 85 °C) makes it well-suited for autonomous vehicles, UAVs, and security systems, providing reliable day/night thermal perception of pedestrians, animals, and objects in adverse weather.

Compact & Lightweight Design for Quick Assembly & Disassembly, Maximizing Portability. Small Fixed-wing Drone Specialized for Aerial Surveying, Surveillance, and Reconnaissance, ensuring Optimal Operation Without Space Constraints. Flight Time : 90min (No Payload) / Cruise Speed : 20m/s, 28m/s (Max) / MTOW : Under 8.6kg Aircraft Size : 2432x1581x403mm / Max Payload : 500g / Range : 3km (Varies by Communication Equipment) / Weight : 8.1kg (With battery, No payload) Application : Aerial Surveying, Reconnaissance, High-Resolution Picture/Video, Payload Drop

P18M Pressure switch