- 3 axis Fiber Optic Gyroscopes / 3 axis MEMS Accelerometers - Operating Range: ± 490º/sec - Bias Repeatability(over temp. range) : ≤ 0.5º/hr (1σ, RMS) - In-run Bias Stability: 0.03º/hr (typical, 1σ) ≤ 0.05º/hr (max, 1σ) - Angle Random Walk : 0.025º/√hr (typical, 1σ) - Power Consumption: 5W @ 25℃ (< 8 W, @ - 40℃) - Input Voltage: + 5 V Lightweight Package: 790g (1.74 lbs)

Copolymer polypropylene waterproof case

The mighty Hitec SG33BLT Series servo actuators operate on DroneCAN (formerly UAVCAN), CAN 2.0 A/B, RS485, PWM and TTL command protocols, and feature brushless motors, magnetic encoders, and hardened steel gears. They are also environmentally sealed with an IP67 waterproof case rating. The SG33BLT Series was initially developed for the automotive industry requiring minimal support equipment and wiring, saving unnecessary installation complexity, cost and weight. This same functionality is now enjoying widespread adoption of CAN and DroneCAN systems within the UAV environment. With options for both 9~15-volt and 18~32-volt operations, and DB9SUB, Circular, & Gland Cable connectivity, the SG33BLT Actuator Series is sure to have a solution for your needs. #UAV #UAS #UAM #UGV #UUV #USV

Product Description and Features 1. Usable Time: Approximately 4 hours 2. Breathable Coolant: Semi-permanent (reusable) 3. Oxygen cylinders and valves: Inspected by the Korea Gas Safety Corporation (KGS) 4. Materials: Outer fabric and PET material are heat-resistant. 5. Drain Button: A device for removing moisture depending on the usage time. 6. Supply Button: A device that temporarily provides a large amount of oxygen. 7. Facepiece: Includes a manual defrost for long-term use. 8. Electronic Pressure Indicator with IT Technology: Life-Saving Alarm (PASS) function, ambient temperature display, container pressure display, automatic alarm for low pressure (approximately 50 bar), usable time display, battery status display, and NFC-based personnel monitoring system (free software provided). 9. Accessories: Bone conduction communication equipment can be applied.

Low Size, Weight and Power (SWaP) at only 297g. Up to 100 TOPS GPU by NVIDIA® Jetson Orin™ NX Supports multiple camera and sensor interfaces 2x GbE and 2x USB3 for RGB/ Infrared/ hyperspectral cameras and lidar/ radar 2x GMSL2 for HDR/ 3D cameras Built-in UART and CAN to interact with flight controller 1x M.2 2230 for storage and 4G/5G communication ready Supports 4S-14S drone battery pack Compatible GMSL2 cameras with pre-built drivers

Each Snowball Edge device can transport data at speeds faster than the internet. This transport is done by shipping the data in the devices through a regional carrier. The appliances are rugged, complete with E Ink shipping labels. Snowball Edge devices have two options for device configurations—Storage Optimized 210 TB and Compute Optimized.

The Bombardier Global 6500 aircraft is the go-to choice for the most demanding specialized missions around the world. Governments, militaries and operators choose this aircraft for its ideal combination of performance, reliability and flexibility, and because it is highly adaptable to outer mold line (OML) manipulation. The Global 6500 aircraft has class-leading power for mission equipment, over 18 hours of endurance, advantageous maintenance intervals and ample cabin space for workstations, patient transport and mission equipment.

Poongsan has been producing a variety of copper and copper alloy plates, ranging from copper products for everyday life to high-tech industrial materials. These copper and copper alloy plates, which are recognized as high-quality materials at home and abroad, are representative industrial basic materials that are widely used in all industrial fields, including automobiles, electrical and electronics, semiconductors, communications, construction, and machinery. Poongsan has various casting facilities, including the world's largest shaft furnace, a hot mill capable of continuously rolling 6-ton slabs, a tandem mill, and a 20-stage cold rolling mill, as well as various hot and cold rolling facilities and heat treatment furnaces. We are building a large-scale integrated production system from the casting process to finishing processes such as cutting and packaging. Poongsan's rolled products are produced in various sizes depending on the type, ranging from 630mm in width, 0.03mm in thickness, and thickness tolerance to 2/1000mm. These products have accurate specifications and physical properties and a smooth surface thanks to the establishment of a thorough quality control system using cutting-edge inspection equipment. Excellent. Poongsan's copper and copper alloy rolled products are produced in a variety of ways, including pure copper, brass, phosphor bronze, nickel silver, cupronickel, and special alloy (PMC26 and other) depending on the alloy composition and casting method. In particular, in response to market demands for new high-strength copper alloys due to technological advancements such as the Internet of Things and electric vehicles, we have developed new alloys (P1000HS and others) and are applying them to high-tech products requested by customers.