Winchester Interconnect Micro, formerly known as Ulti-Mate Connector, designs and manufactures a broad range of precision engineered Micro D Connectors that are designed to be environmentally sealed, making them suitable for a wide range of applications. They can operate in temperatures ranging from -55°C to 125°C, with high-temperature versions available for more extreme environments (indicated by "HT" in the product name). These connectors come with 9 to 100 contacts and adhere to the MIL-DTL-83513 standard. And, leading manufacturer for high density, lightweight Nano connectors available in 9 to 51 contacts, these connectors cater to various applications. As a QPL qualified supplier for MIL-DTL-32139 product.

Precision Molded LWIR lenses using Chalcogenide glass "High-Volume & Cost Effective Manufacturing" High performance Diffractive-Aspheric LWIR(@8~12μm) lenses Athermalized Fixed Focus: FL 8.1, 15, 18mm / F# 1.0 High Efficiency AR(Anti-Reflective) Coating Technique for LWIR Applications: Thermal Imaging and Thermography

The fully redundant DA 30-HT-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The position sensor features a three channel design (for 2 out of 3 voting). Additionally, there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485.

A Main Generator installed in the KUH series that supplies system power.

MDCX, multipin coax connectors, offer low VSWR of 1.25:1 (typ) up to 10 GHz (max mated pair), maximum overall diameter of 0.125" fitted into low-profile micro-D housing, with constant 50 Ohm airline impedance. MDCX coaxial contacts are compact in size allowing multiple high density connections in a Micro-D style shell for applications where space and weight savings are important. No cumbersome spring mounts are required. These connectors are also available with locking post mechanisms or blindmate hardware attachment.

The Euroflir™ 410 family allows fixed, rotary-wing aircraft & UAV to carry out, in any conditions, intelligence, protection, search and rescue missions thanks to long-range observation and accurate targeting and designation capabilities. Very-high-resolution multispectral cameras Euroflir™ 410 operates in four spectral wavebands - TV, NIR, SWIR, MWIR – with a wide field-of-view and ultra-long-range observation, allowing it to function at standoff distance any time day or night. The Euroflir™ 410 is specially adapted to the wide variety of missions: supporting law enforcement, homeland security, border and coastal surveillance, intelligence, SAR and CSAR. Euroflir™ 410 : a modular system in 3 main versions EuroflirTM 410 Surveillance: eyesafe target range measurement and 3D location-determination. EuroflirTM 410 Marking: target marking for either crew members or allied ground forces with night vision goggles. EuroflirTM 410 Designation: accurate designation with suitable laser coding for laser-guided weapons. Advanced embedded functions Improved situational awareness: moving map & augmented reality (visualize the line-of-sight, define points of interest on a digital map, real-time video). Automatic detection: Moving Target Indicators (MTI) & Hot Spot Detection (HSD). Enhanced identification: Super resolution & Fusion.

CI Systems사의 는 I-레벨 광학 테스트 및 실험실 테스트를 수행하는 데 이상적인 장비입니다. 소형이기 때문에 휴대 가능하며, 컴퓨터화되어있어 차량에 설치할 수 있습니다. 열화상 장비 및 가시광 센서에 대한 종합적인 테스트를 현장에서 할 수 있어 D-레벨 시설 없이도 테스트를 효율적으로 수행할 수 있습니다. 콜리메이터, 방사선원(블랙바디, 가시광 광원), 타깃 휠(수동 또는 전동)로 구성되며, CI Systems의 CTE 소프트웨어와 연동 시 간편하고 객관적이며 반복성을 극대화한 테스트가 가능합니다. 환경 변화에도 높은 정확도를 유지하며, 환경 챔버 테스트, 생산 라인 테스트, 현장 테스트 등 다양한 환경에서 활용할 수 있습니다. The CI Systems ILET (Intermediate-Level Electro-Optical Tester) family of test systems is ideally suited for performing I-level optical tests and laboratory testing. Portable, compact and computerized, ILET testers can be installed on a vehicle, bringing comprehensive testing of thermal imagers and visible light sensors to the field, reducing the need of D-Level facilities. The basic ILET configuration includes a collimator, a radiation source (blackbody and/or visible light source) and a target wheel (manual or motorized). The ILET is easy to use when interfaced with CI Systems’ CTE software (optional), minimizing testing turnaround time and maximizing testing objectivity and repeatability. The testers retain their accuracy over a wide range of ambient temperatures. Thanks to the ILET’s outstanding features and versatility, it is useful in a variety of applications such as testing in environmental chambers, testing on production lines and testing in the field..

CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable. This product supports the following transmission standards. Designation Bit Rate ========== ======== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.  4 CH x 1 Camera Configuration  2 CH x 2 Camera Configuration  1 CH x 4 Camera Configuration  2 CH + 1CH Camera Configuration