High-performance video tracking camera UVA, a high-performance long-distance tracking camera optimized for aircraft such as helicopters. 2-axis, 3-axis, 4-axis and various sensors can be installed. Depending on your needs, you can choose from various options such as LRF, SWIR, and Pointer.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

Next-generation satellite multi-band terminal system development project

The Haigh-Farr Wraparound™is a self-contained, omnidirectional antenna for cylindrical or conical shaped vehicles. A single point feed is used and no external splitters, combiners or cable harnesses are required for installation. The antenna may be mounted flush, or on the exterior of the vehicle.

From precise control of various optical components(laser/detector/amplifier) & laser beam alignment(QD/FSM), a data rate of 10G can be achieved over distances of several thousand kilometers.

옥외 스펙트럼 모니터링 및 위치 탐지 솔루션 R&S®UMS400 범용 모니터링 시스템은 8kHz에서 8GHz까지 스펙트럼 모니터링 및 방향 탐지를 지원합니다. 또한, R&S®CS-MC20 마이크로파 컨버터를 통해 최대 20GHz까지 확장할 수 있습니다. 무선 통신 서비스의 주파수 범위가 점점 증가함에 따라 최대 8GHz, 경우에 따라 최대 20GHz까지 모니터링 스테이션이 필요합니다. 일반적으로 가장 높은 감도를 위해 케이블 손실을 최소화하기 위해 안테나 근처에 모니터링 센서를 설치해야 합니다. R&S®UMS400과 R&S®CS-MC20 모두 옥외 하우징 옵션을 통한 야외 설치가 가능합니다.

NVIDIA IGX is a cutting-edge AI platform delivering high-performance, secure, and reliable computing. Built on autonomous-driving expertise, it supports industrial automation and medical devices, with PCIe expansion for extra vision inputs and full-stack enterprise-grade software and long-term support.

The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.