SKYLIGHT™ is a mono or bi-constellations dual civil/military GNSS receiver, providing the highest navigation performances and operational flexibility. It is suitable for a large range of applications: aircrafts, helicopters, UAVs, missiles, land vehicle.

The ENS4000(Sub-6 5G Outdoor base station) is designed for outdoor services in the n79 (4.7GHz) band, providing coverage on the kilometer scale and enabling seamless private 5G service even in outdoor environments.

< Frequency Range > ● LB-400: 400 ~ 460MHz ● LB-900: 800~928MHz ● MB-1500: 1300~1500MHz ● MB-2400: 2400 ~ 2500MHz ● HB-5.2: 5150 ~ 5250MHz ● HB-5.8: 5725 ~ 5875MHz < TX path output Power (at antenna port) > ● Normal mode: 35dBm [min] ● On each antenna port 2x 35dBm ● Interference mode: 40dBm [min] < TX path maximum Input Power > ● +20 dBm < RX path Gain > ● 25dB typ. < RX path Noise figure > ● Low bands: 3dB max. ● High bands 3.5dB max. < RX path IIP3 > ● -10dBm typ. < RX IP1dB compression point > ● 15dBm typ. < Power Supply > ● +24V ± 1 Vdc

Main Features of CLS-30T3 Camera Link Compatibility: Supports all Camera Link types (Area Scan / Line Scan). Video Distribution: 1:3 distribution capability supporting Base, Medium, and Full configurations. Power over Camera Link (PoCL): Performs PoCL Bypass functionality. Pixel Frequency: Supports a pixel frequency range of 20 MHz to 85 MHz. Transmission Quality: Ensures lossless video signal transmission. Power Connector: Equipped with a lockable DC power jack (Molex connector). Interface: Supports MDR-26 type connectors. Control Signal Support: Supports all standard RS-232 communication speeds.

The SCFAN-CTRL-5U is an internal fan control module installed inside the chassis to manage cooling performance. It integrates with FAN trays and operates through Kontron’s Power Supply Control Module (PSCM) to control up to one 12V @ 3.5A fan and seven 12V @ 2.5A fans. This module ensures efficient thermal management and stable system operation in high-performance VPX-based embedded systems. It is deployed in the M-SAM-II multi-function radar system, providing reliable and optimized cooling control for mission-critical environments.

PELICAN-D JT is a MWIR detector for missile applications. The FPA is InSb based, having digital Readout Integrated Circuit (ROIC) in a format of 640 x 512 with 15μm pitch. Pelican-D JT has a unique structure of Dewar which enables very fast cool down time and hence quick mission readiness using Joule-Thomson (JT) cooler. Due to the low heat load on the focal plane, the detector achieves long mission duration. The Detector can be supplied with a proximity board which provides Camera Link interface to the customer system. This highly simplifies the integration of the detector to the system.

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. Linear Acceleration Compensation Certus Mini uses an innovative algorithm to compensate for linear accelerations. This allows Certus Mini to maintain accurate roll and pitch through short term linear accelerations that typically cause significant errors in competitors systems. For long term linear accelerations Certus Mini supports the addition of an external GNSS receiver for full acceleration compensation. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

Material: SS400-540, SPPS and ALDC1-8 Application Equipment: 60mm Mortar Purpose: Training for Prectice