At Honeywell, we solve some of the most difficult challenges businesses face. Explore some of our most popular products.

Toxic gases, such as Silane (SiH4), Nitrogen Trifluoride (NF3), Sulphur Hexafluoride (SF6), Ammonia (NH3), Nitrous Oxide (N2O), etc. must be contained in IMDG certified MEGC tubes for ocean transportation. For high purity gases such as SiH₄, and NF₃, DS Aether CT provides internal-polished tubes to a grade of 3S, 25S, etc. depending on customer's requirements. DS Aether CT’s tubes keep moisture levels below 1 ppm or 3 ppm by a heated vacuuming process so that gas quality can be maintained at high purity level.

We bring all our skills and expertise to bear in product development and in-service support in order to meet our customers' needs: 3D drawings and design Aeroelasticity Thermal, CFD analysis Static and dynamic analysis Electrical/hydraulic/mechanical system design Cost-optimized design, cost-benefit analysis Parametric experiment design Optimization techniques and algorithms Multiphysics modeling Concessions management: control plan, extension of concession, design engineering office, concession justification, impact analysis (FMECA, process/design change, etc.), definition of a repair program, updating of certifications Flight physics Configuration management Design, calculation and modeling Composite or metallic parts

Key Features - Frequency Range: 8.5 - 10GHz - RX Noise Figure: 3.0dB - RX Small Signal Gain: 21 dB - TX Small Signal Gain: 27dB - TX High Pout: 39dBm - TX High PAE: 37% Chip size: 2.9x2.5x0.1mm  

DIESTONE DLV is a next-generation cleaning solvent for aerospace and industrial surface preparation. With 70% VOCs, controlled volatility, low odor, and no chlorinated hydrocarbons, it ensures operator comfort and safer workshops. Its high flash point (49 °C / 120.2 °F) reduces fire risks while maintaining powerful cleaning and degreasing performance on metals and composites. Non-corrosive on light alloys, DIESTONE DLV also provides reliable reactivation of epoxy and polyurethane primers before painting, bonding, or sealing. Approved to key aerospace standards, including Boeing BSS 7432 and SAE (ARP1755B, AMS1528, AMS1536), it is trusted by OEMs and MROs worldwide. Available in multiple packaging formats, from bulk containers to pre-saturated wipes, it offers flexibility for both manufacturing and maintenance operations.

Short-Wave Infrared(SWIR) Camera is an imaging device that detects reflected light in the 0.9–1.7 μm wavelength range. Compared to visible light, SWIR enables longer-distance observation and provides high-resolution imagery even in degraded visual environments, such as fog, haze, or dust, where conventional visible cameras cannot operate effectively. These capabilities are realized through the use of InGaAs sensors, offering precise detection and surveillance that are unattainable with visible-light imaging. Accordingly, SWIR cameras serve as an advanced imaging solution not only for military, security, and disaster response applications, but also for industrial inspection and research fields.

AI Navigation Algorithm Certus features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS Certus contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Dual Antenna RTK GNSS Certus contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi-Protocol Support Certus features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

This rocket nozzle featuring conformal cooling channels and isogrid ribbing was manufactured using EOS Copper CuCP, a pure copper material optimized for additive manufacturing. The production required approximately 72 hours, taking advantage of the exceptional thermal and electrical conductivity of pure copper to meet demanding aerospace performance requirements. As one of the few companies in Korea capable of performing metal additive manufacturing with pure copper, we provide advanced technical expertise and support OEM production as well as collaborative technology development projects with various industrial partners. The showcased component was designed by nTopology and demonstrates the synergy of advanced design optimization with state-of-the-art copper additive manufacturing.