Auto Assembly Jig For : Wing Bottom Panel A320 Project 50m (L) x 1.1m (W) x 3.6m (H )

The SCXMC-HDLC card operates through the XMC interface of the SBC and provides real-time communication for control and status data based on synchronization signals. It supports serial communication via the SBCRTM’s Micro D-sub 37-pin connector using a standard D-sub 9-pin interface, allowing long-distance transmission through LVDS signaling. With four transmit/receive channels, it achieves 1–8 Mbps per channel and delivers low-latency performance of less than 40 µs for real-time operations. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system, enabling fast and reliable control data communication across mission-critical components.

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

The FLIR 380X upgrade sets the new standard for law enforcement mission support. Learn more: https://www.flir.com/surveillance/flir-380x-upgrade/

The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

The ECL4000 is an LTE outdoor base station developed for the U.S. CBRS market, providing a service radius of several kilometers and enabling seamless private LTE network service.

The mmWave 5G small cell provides ultra-broadband service in the n257 (28GHz) band, delivering higher data capacity than n79 (4.7GHz) small cells. It supports NSA mode via EN-DC or NR-DC with LTE and 5G NR Sub-6GHz base stations, and can also operate in SA mode as a standalone mmWave service.

The Sparrow-HD is a cutting-edge, low-SWaP 5μm MWIR detector module engineered to meet the stringent demands of the defense wide distribution market. Its innovative design ensures exceptional performance while minimizing size, weight and power consumption, making it a game-changer in the industry. Sparrow-HD is based on two mature sensing material technologies: • XBn with 4.2μm cut-off, operating at 150K and enabling minimal power consumption • Hot Full-Mid-Wave (HFM) with 4.85μm cut-off, operating at 120K and supporting up to 200Hz