The SCVPX-SSGM (Synchronous Signal Generation Module) generates synchronization signals to coordinate the operation and timing of various radar system components. It can generate synchronization signals using an internal clock, receive an external clock, or regenerate synchronization signals from external sources to maintain precise timing cycles. A device driver program is required for configuration and operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system, providing precise timing synchronization across mission-critical subsystems.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

MQ-9B SeaGuardian® is the maritime-focused sibling of the
revolutionary SkyGuardian® remotely piloted aircraft system
(RPAS) that has been missionized using “bolt-on/bolt-off” maritime
sensors. SeaGuardian is designed to fly over the horizon via
satellite for over 30 hours (depending on configuration) in all
types of weather and safely integrate into civil airspace, enabling
joint forces and civil authorities to deliver real-time situational
awareness anywhere in the maritime domain—day or night. This
highly versatile maritime patrol and reconnaissance aircraft can
seamlessly integrate a centerline wide-area maritime radar, an
automatic identification system (AIS), electronic support measures,
and a self-contained anti-submarine warfare (ASW) mission kit.
SeaGuardian not only integrates the most advanced maritime
intelligence, surveillance, and reconnaissance (ISR) capabilities,
but it is also the first RPAS in its class to enable real-time search
and patrol above and below the ocean’s surface.

To date, we have experience producing more than 10,000 pieces and have the ability to produce an average of 500 molds per year.

- Operates by an internal pipeline open/close mechanism controlled by a solenoid valve - Relief plug: prevents malfunction due to internal pressure expansion - Manual discharge available via manual handle when power is OFF - Outputs an abnormal signal if the reference pressure drops due to extinguishing agent leakage

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

A Main Generator installed in the KUH series that supplies system power.

Powered by NVIDIA® Jetson AGX Orin™ SoM bundled with JetPack 5.1.1 Powered by NVIDIA® Jetson AGX Orin™ Industrial bundled with JetPack 6.0 Rugged -25°C to 70°C fanless operation (JAO32/ JAO64) - No throttling at 55°C with JAO64 MAXN Mode Rugged -40°C to 75°C fanless operation (JAOi) - No throttling at 50°C with JAOi MAXN Mode IP66 waterproof and dustproof Support 8x GMSL2 automotive cameras via FAKRA Z connectors (NRU-230V-AWP) 4x PoE+ GbE and 1x 10GBASE-T via M12 X-coded connectors 2x isolated CAN 2.0, 1x RS232, and 1x isolated RS485 via M12 A-coded connectors 1x system monitoring port by automotive-grade MCU 8V to 48V wide-range DC input with built-in ignition power control Compatible GMSL2 cameras with pre-built drivers