The Transmit/Receive Module splits 2 transmit input channels into 32 output channels. Each channel delivers an output power of at least 3.2 W with a transmit efficiency of 35.5% or higher. It features independent phase control for each transmit channel. On the receive side, 32 input channels are combined into two output channels. The total receive gain is 34 dB or greater, and each channel supports individual gain and phase control. The noise figure is 3.5 dB or lower per channel. Built-in monitoring functions include internal temperature monitoring and output signal monitoring.

MONEL® ALLOY 400 Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY K-500 Bars INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 625LCF® Sheets and Plates INCONEL® Alloy 693 Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 Bars-Sheets and Plates INCOLOY® Alloy 800 H / HT Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 825 Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy DS Bars-Sheets and Plates INCOLOY® Alloy 330 Sheets and Plates

Liquid Measurement System (LMS) capacitance AC and DC fuel gauging probes use lightweight and durable carbon composite materials. In addition to being some of the lightest fuel probes in the industry, they are also virtually immune to corrosion, cracking, dents, and extreme field conditions. Our capacitance probes are inherently crash resistance by collapsing onto itself during hard impact landings to avoid tank penetration and fuel leaks. All electrical connections on the probe are bonded, and there is no friction or riveted electrical connections.

Operate the automated artillery system according to the operating procedure. It is the highest level controller of the automated artillery system that collects status information from each unit device controller that composes the automated artillery system, diagnoses faults and builds a database. - VxWorks operating system - Operating system recovery function - Building a failure history database in the built-in SSD - Check unit control device status information through communication

The NSP-7 combines IMSAR’s typical reliability with increased capabilities: for example, the ability to detect footprints. It can even perform SAR Motion Video (SMV) when paired with an airborne server. The IMSAR NSP-7 radar system is a high-performance, weatherized radar pod engineered for long-range Intelligence, Surveillance, and Reconnaissance (ISR) and maritime/ground surveillance missions. With advanced Synthetic Aperture (SAR) and Moving Target Indication (MTI) capabilities, the NSP-7 delivers exceptional imaging and detection in a rugged, low-SWaP (Size, Weight, and Power) package.

Currently in the final stages of development. Compact engine of a simple design and small frontal diameter, fuel lubricated, equipped with a BLDC starter-generator. Excellent thrust-to-weight ratio. Pyro ignition (optional).

Trade Search

The QRS116 is a compact angular rate sensor ideally suited for applications in tactical, aerospace and mission-critical instrumentation. The QRS116 features exceptionally low noise, fast start-up, and a simple electrical interface, the QRS116 has no moving parts ensuring long service life and high MTBF. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec Input Voltage + 5 Vdc ±5% regulation Short Term Bias Stability (100 sec at const. temp) 3 deg/hr Output Noise ( DC to 100 Hz) ≤ 0.002°/√Hz* * Values Indicated are for ±100°/sec. Range Features Exceptional Bias Stability Unprecedented Low Angle Random Walk Values Superior Vibration Performance Compact Industry-Standard Package (Same as QRS11) Rugged, Compact Package Integrates easily Applications Tank Turret Stabilization Defense Fixed Wing Defense Helicopter Unmanned Aerial Vehicles UGV – Unmanned Ground Vehicle Platform Stabilization Camera Stabilization Antenna Stabilization ROV – Remotely Operated Vehicle