BAE Systems has acted as the manufacturer and systems integrator of the Bradley program for over 30 years, including conducting various upgrades based on customer needs and mission requirements. The newest Bradleys feature the latest digitized electronics for optimum situational awareness, network connectivity, and communication within the ABCT. Over the life of the Bradley program, there have been several survivability upgrades, including installation of underbelly protection and the Bradley Urban Survivability Kits (BUSK), further enhancing the safety of one of the most survivable vehicles in the fleet.

P18M Pressure switch

KJF designed and fabricated A320 Sharklet Moving Line

SAF-FIRES™ is a standards-based, image generator agnostic, and scalable Call-For-Fire and Close Air Support training simulation with autonomous Smart Trainer suitable for deployment in Joint Fires and accreditable JTAC training simulators. Built upon the same Call-For-Fire and Close Air Support software engine that powers the accredited simulation Fires FST™, SAF-FIRESTM delivers the same mature and complete Joint Fires training solution but makes it available for integration with any DIS, HLA or CIGI compatible simulation or Image Generator. Supporting both conventional near-peer and counter-insurgency operational scenarios, SAF-FIRES™ enables JFOs and JTACs to train realistically in a modern complex battlespace against an agile and adaptive adversary. Heightened realism and cognitively challenging training are enabled through the incorporation of non-combatants, urban clutter, UAV surveillance, various close air support platforms and accurate military targeting procedures.

Our products serve the clients in military and aerospace industries, who require high performance with strength and ability to perform at extreme temperatures and pressures.

IP66-rated waterproof and dustproof design Intel® Alder Lake Core™ i3-N305 with 8 E-cores -40°C to 70°C temperature operation 2x 2.5GbE via M12 X-coded connectors 1x isolated RS-232, 1x isolated RS-422/485 via M12 A-coded connectors 3x isolated DIO and 1x CAN2.0B via M12 A-coded connectors Low power and high endurance FRAM for data logger Class 1, Division 2 and ATEX certification in hazardous area applications 8V to 35V DC input with ignition power control input via M12 A-coded connector

For : Elevator Assembly Tool A320 Project 3.5m (L) x 1.5m (W) x 2m (H )

NICKEL 200 / 201 -Bars-Sheets and Plates-Tubes and Pipes NICKEL 270 -Sheets and Plates-Wire MONEL® ALLOY 400 -Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY K-500 -Bars NILO® Alloy 36 -Bars-Sheets and Plates-Tubes and Pipes NILO® Alloy 42 -Bars-Sheets and Plates NILO® Alloy 48 -Bars-Strip NILO® Alloy K -Bars-Sheets and Plates-Wire INCONEL® Alloy 230 -Bars-Sheets and Plates INCONEL® Alloy 600 -Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 601 -Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 617 -Bars-Sheets and Plates INCONEL® Alloy 625 -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 625LCF® -Sheets and Plates INCONEL® Alloy 693 -Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 -Bars-Sheets and Plates INCONEL® Alloy X-750 -Bars-Sheets and Plates INCONEL® Alloy C-276 -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy HX -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 22 -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 800 H / HT -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 825 -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy DS -Bars-Sheets and Plates INCOLOY® Alloy 330 -Sheets and Plates INCOLOY® Alloy A-286 -Bars-Sheets and Plates NIMONIC® Alloy 75 -Bars-Sheets and Plates NIMONIC® Alloy 80A -Bars-Sheets and Plates NIMONIC® Alloy 90 -Bars-Sheets and Plates-Wire-Strip NIMONIC® Alloy 263 -Sheets and Plates UDIMET® Alloy 188 -Bars-Sheets and Plates UDIMET® Alloy L-605 -Bars-Sheets and Plates Waspaloy® -Sheets and Plates