Inverter platform developed by entirely by Drive System Design with a focus on versatility and flexibility, resulting in a powerful and highly versatile hardware and electronics base platform, which can operate: - From 200 to 800V and beyond, - At a Continuous Output of 450A rms - Delivering an output Power up to 300kW and - A PWM frequency from 20 to 30kHz

Product Information Frequency signal generator for high-performance, high-precision target detection High-frequency resolution design and frequency conversion function using DDS method main performance Frequency: L-Band ~ X-Band Pulse Mode, Low spurious Output Level: -10~+15dBm Range Spurious: -55dBc min Harmonic: -50dBc min Phase Noise: High Performance Frequency Sensibility: 50ppm max Port isolation: 70dBc Min Applicable fields High-precision targeting guided weapon tower system and radar system can be applied

It is capable of carrying heavy payloads, making it suitable for transporting critical supplies and equipment. The system supports swarm operations, enabling coordinated missions with multiple drones. Its robust design allows flexible deployment across diverse military scenarios, enhancing operational efficiency and resilience.

Material: SS400-540, SPPS and ALDC1-8 Application Equipment: 60mm Mortar Purpose: Training for Prectice

Description

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Ray Service, headquartered in Staré Město, Czech Republic, is an international innovative manufacturer of cable harnesses, electromechanical assemblies, and electronic equipment. It is also a distributor and integrator of cable components and system products. More than 30 years of experience and intensive development have resulted in a strong, modern enterprise, a reliable and sought-after partner on an international level.

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).