Versatile, high density 4 contact row connector solution for board to board and wire to board with built in coding and keying as well as ESA qualification. With a 0.6mm contact diameter, CMD connectors are available from 42 to 316 contact positions with dip solder and SMT soldering contact termination types.

Your Benefits: Stunning Image Quality SWaP-Optimized, Smallest Shape, IP69K Protection Ultra-Low Latency G2G (Glass-to-Glass) Frame Rate: 60 Hz Increased Optical Resolution 2.1 MP, 1920 x 1080 Dynamic Range: 120 dB Integrated Heater for De-Icing / De-Misting FoV 53°, Alternatives tbd

The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens is a first to market low-Size, Weight, and Power (SWaP), compact lens, for the newly introduced 5μm SXGA, as well as for 10μm SXGA, and 15μm VGA SWIR detectors. The SWIR & NIR zoom lens employs a unique mechanical and optical design, resulting in an all-around smaller and lighter unit with only 860gr in weight, and 224mm in length, making it approximately 60% lighter than similar existing SWIR lenses. The SWIR lens is also chromatically corrected to support a broader short-wave IR wavelength regime from 0.7-1.7μm and operates with minimal distortion. The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens presents an unrivaled combination of SWaP capabilities, detection range exceeding 26km. Product features: • Continuous zoom in the 0.7-1.7μm SWIR regime • Designed for 5μm, 10μm SXGA & 15μm VGA SWIR detectors • Lightweight (<860 gr) • Detection range >26 km • Enables laser-line detection

- Interior/Exterior lighting control device - Input Power : 28 VDC - MIL-STD-461 - MIL-STD-704 - RTCA/DO-160 Section 25

- Swarm (Multicopter) : 20 Drones/ 1 swarm - Endurance : Rceonnaissance Drone: 23mim. / Loitering munition: 23mim. - MTOW : 2.4kg - Payload : 600g (Leader: EO/IR/LRF, Attack Drones : munition ) - Size : 300x360mm - Control Range : up to 5km

Haigh-Farr offers a family of low-cost Blade antennas covering frequencies from 300 MHz to 8 GHz. These antennas have been in use for over 30 years in airborne applications, and most models are available for off-the-shelf delivery. Haigh-Farr also offers a series of broadband blade antennas covering a variety of frequency ranges.

The Boreas 50 fiber optic gyroscope (FOG) is a highly accurate and reliable navigation technology. It’s the result of over 25 years of development in partnership with two research institutions. The gyroscope uses a closed-loop optical coil and an advanced spread-spectrum digital modulation technique to improve accuracy, stability, and reliability while reducing size, weight, power, and cost. Gyrocompass North-Seeking The Boreas range of fiber optic gyroscopes (FOGs) can determine heading without needing a Global Navigation Satellite System (GNSS) or a magnetometer. By sensing the Earth’s rotation, the system’s north-seeking algorithm can acquire an accurate heading. This is possible in static and dynamic conditions, even at high latitudes. Reliability Boreas 50 has been designed from the ground up for rugged reliability. Both the hardware and software are tested and certified to environmental and electromagnetic standards (MIL-STD 461 and MIL-STD 810H). The precision aluminum enclosure is waterproof and dustproof to the IP67 standard. The system is resilient to shock and vibration, allowing it to be used in extreme conditions. Industry-Leading SWaP-C The Boreas 50 FOG Series delivers industry-leading performance with a compact and lightweight design. Excelling in terms of Size, Weight, Power, and Cost (SWaP-C). Multi-Protocol Support The Boreas 50 features multiple interfaces, including Ethernet, CAN, RS232, 1PPS, RS422, and GPIOs. It supports industry standard protocols, including NMEA 0183, CANopen, 1PPS, and ANPP, as well as a wide variety of proprietary protocols. A rich, responsive embedded web interface provides full access to all of the device’s internal functions and data. Internal storage allows for up to one year of data logging.

Mini size - Shell size 11
Compatbile With: TE Pro Beam mini, QPC Qmicro, Stratos HMC, Fibreco Mini2

The HXB11 Connectors, featuring expanded beam technology, hermaphroditic connection, rugged construction for field deployment have been designed for harsh environment applications such as military tactical communications, avionics, offshore systems, outside broadcast, mining and plant.

The expanded beam technology uses expanded and collimated beams to couple optical fibers without any contact. It could allow for optics to be used in areas that have been quite restrictive due to presence of damage or contamination at the fiber end. Hermaphroditic connector design enables fast deployment by daisy-chaining multiple cable segments.

FEATURES
· Advanced expanded beam technology
· Rugged field deployable fiber optic connector
· Hermaphroditic interconnection
· 2 to 4 Optical Channels for Singlemode or Multimode
· Custom configurations available
· Environmental sealing (IPX8)
· Very high resistance to vibration, shock, environmental effects, dust, and debris