Dual Narrow Linewidth Amplifier - 3kW per channel

ELECTROMECHANICAL RELAYS FROM 2 TO 10 AMPS.

With an AS9120-certified logistics system and strong semiconductor expertise, we are tailored to support defense and aerospace customers, where small-volume, high-mix requirements, long life cycles, and unpredictable demand are common. Beyond semiconductor components, we also provide electronic instruments and software solutions, serving as a total solution provider.

The L-band 8-channel filter bank receiver module is equipped with eight internal filter bank channels, enabling improved reception performance by isolating specific sub-bands within the receive frequency range. A 100W limiter at the input stage protects the receiver from high-power signals, and the module offers a low noise figure of 3.0 dB or less. The input P1dB for the receiver is -20 dBm, and the module features a built-in path self-test function.

Drone Hunter XRS is a rifle-type drone jamming gun with an intuitive design for quick onsite responses to drone threats. Drone Hunter XRS is capable of neutralizing commercial drone frequencies including ISM band and GNSS L1 & L2 up to 1km. With its highly efficient, rugged and compact product design for lightweight, easy-to-use operation, Drone Hunter XRS is certified with IP65 and ensures the best performance from various application areas such as checkpoints, borders, military/police operations where users are supposed to move and patrol.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

Our LiDAR uses a custom-designed laser that separates 1064 nm and 532 nm wavelengths from a single source, with two dedicated receivers capturing each set of data independently. Inside the system, the linear laser beam is refracted at a 10-degree angle through a prism to enable circular scanning. An RF module is also integrated for real-time equipment status monitoring. From circuit board design to component selection, every part of this system was developed in-house by multiple institutions. As a result, we have successfully eliminated reliance on foreign technology.

Versatile, high density 4 contact row connector solution for board to board and wire to board with built in coding and keying as well as ESA qualification. With a 0.6mm contact diameter, CMD connectors are available from 42 to 316 contact positions with dip solder and SMT soldering contact termination types.