The GSG-8 GNSS Simulator is an advanced software-powered turnkey simulator, supporting multi-constellation, multi-frequency, and hundreds of satellite signals. With an incredible 1000 Hz iteration rate, the GSG-8 GPS Simulator is ideal for space trajectories, custom PNT signals, hardware-in-the-loop, and any type of all-in-view satellites simulation. With the GSG-8 Simulator, you can generate RF signals to simulate how your receiver device will react in the real world, under the simulation parameters that you set. Control every aspect of your simulation, including 6 Degrees of Freedom (DoF) receiver trajectories, multi-vehicle simulation, multi-path signals, jamming and spoofing, as well as atmospheric interferences. The GSG-8 is the most popular positioning, navigation, and timing test solution offered through Safran’s GSG family of Skydel-based simulators. It was developed to deliver the highest standard of Global Navigation Satellite System (GNSS) signal testing and sensor simulation performance in an easy to use, upgradable and scalable platform.

Continental connectors are manufactured with highest quality materials. Our contacts are machined to close tolerances as opposed to stamped and formed styles. All molding compounds are glass reinforced, flame retardant and able to withstand severe environmental and mechanical requirements. Military connector families conform to the highest Defense Supply center (DSCC) standards, which require qualification testing and continued periodic requalification under the surveillance of government representatives to maintain our Company Qualified Product Listing (QPL)

SAR satellites are designed for change detection and our unique Dwell, Spot, Strip and Scan modes give you the flexibility to monitor very large areas and zoom in to areas of interest at ultra-high resolution as needed. Get unprecedented visibility and flexibility with Dwell, Spot, Strip and Scan imaging modes. Monitor areas up to 50,000 km² and zoom in to areas of interest at very high resolution down to 50 cm – day, night and in any weather

R&S®M3SR은 민간, 방위, 해상 지-공-지 통신 솔루션을 위한 최신 고정식 무전기를 대표하는 기기입니다. 로데슈바르즈는 점차 엄격해지는 통신 요구사항에 대해 수년 간의 실무 경험을 기반으로 한 기술 개념으로 대응하고 있습니다. 무전기는 가장 엄격한 품질 측면을 충족하여 최대 RF 성능을 제공합니다. 이 고성능 소프트웨어 정의 무전기는 전 세계 보안 당국과 정부 조직에서 높은 평가를 받고 있습니다.

Ultra-High Accuracy MEMS Motus features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Motus’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Motus is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. Miniature Package Never before has such high inertial performance been available in such a small package. Motus consumes just over 1 cubic inch in volume and weighs only 26 grams. This makes it ideal for weight and size sensitive applications. Motus is available in an OEM package suitable for integration into larger products or an enclosed package for external and standalone use. Advanced Signal Processing Motus samples its sensors synchronously at 1000Hz through six individual 24-bit differential ADCs which minimizes noise as well as providing optimal thermal calibration and performance characteristics. 14 separate heavily filtered regulated power supplies ensure that each sensor and ADC is operating off the cleanest possible power supply. Reliability Motus has been designed from the ground up for mission critical control applications where reliability is very important. It is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance in mind. The hardware is designed and manufactured to mil standards. High Update Rate Motus outputs temperature calibrated sensor data at 1000Hz as well as filtered attitude at the same rate. This allows for control of dynamically unstable platforms.

This EGR-Cooler prototype, developed in collaboration with Hyundai Motor Company, was fabricated using EOS Stainless Steel 316L, renowned for its excellent corrosion resistance and mechanical properties in demanding automotive applications. The part was additively manufactured over a period of 64 hours, demonstrating the advanced capabilities of metal 3D printing for precision and reliability. Unlike conventional designs, this innovative component integrates 14 separate parts into a single, unified structure, greatly simplifying assembly while enhancing operational efficiency. The implementation of a Triply Periodic Minimal Surface (TPMS) structure within the cooler significantly improves heat exchange performance and enables substantial weight reduction, meeting next-generation thermal management requirements. Partners Lab stands as a leader in Korean additive manufacturing technology, offering cutting-edge capabilities in OEM production and collaborative technical development for various industrial sectors. This EGR-Cooler, designed by nTopology, exemplifies our engineering expertise and commitment to delivering high-performance thermal products for automotive and beyond.

It is a product lineup that is proven in global markets and has world-class competitiveness. And it is being exported to more than 20 countries around the world.

The lightest plate carrier 4-way stretch Tweave sewn internally for comfort Poly mesh cummerbund for increased ventilation Rear internal pocket for storage Elastic webbing straps for cable management PALS webbing for MOLLE attachment Removable front flap Zipper for DS Assaulter's Zip-On Back Panels QASM buckle System Available in different shapes depends on the plate thickness Soft armor can be added Composition Material : 500D Cordura® + ARAMID / PV® Size : Small : 8.5" x 11.5" Plate Pocket Medium : 9.3" x 12.3" Plate Pocket Large : 10" x 13" Plate Pocket XLarge : 10.9" x 13.8" Plate Pocket Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)