Short-Wave Infrared(SWIR) Camera is an imaging device that detects reflected light in the 0.9–1.7 μm wavelength range. Compared to visible light, SWIR enables longer-distance observation and provides high-resolution imagery even in degraded visual environments, such as fog, haze, or dust, where conventional visible cameras cannot operate effectively. These capabilities are realized through the use of InGaAs sensors, offering precise detection and surveillance that are unattainable with visible-light imaging. Accordingly, SWIR cameras serve as an advanced imaging solution not only for military, security, and disaster response applications, but also for industrial inspection and research fields.

The EL4000 is an RU/DU-integrated LTE outdoor base station that provides long-distance LTE service outdoors and has been supplied through KT for the Ministry of Oceans and Fisheries’ LTE-M network.

- FOG based Inertial Navigation System for Gyrocompass - Position Accuracy(INS/GPS): < 3 m - Heading Accuracy: < 0.1º  sec (LAT) - Attitude Accuracy(Static): 0.01º - Attitude Accuracy(Dynamic): 0.01º - Operating Voltage: 9 to 36 VDC - Power Consumption: < 15 W (typ.) - Dimension(L x W x H): 330 mm x 192mm x 180mm

EFFECTIVE RANGE : 600 m RIFLING : 1:7" Twist, 6 Groove R/H MAGAZINE CAPACITY : 30 rounds

33 GHz Mixed Signal Oscilloscope; 4 analog / 16 logic channels

Features - Excellent absorption performance (Max: -25 dB, Avg: -10 dB) - Withstands 00 minutes at 000 °C - Easily applicable to complex structures, including curved surfaces, gaps, and protrusions - Low dry density and specific gravity - Reduced number of coating layers (improving workability) - Passed environmental resistance and durability tests according to the operating conditions of guided missiles. - Insulating properties to minimize the effects of lightning

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

Our clamping division manufactures parts to secure external lines and tubes to the landing gear fitting and oleo.