When your missions take you into extreme environments, the Bell 412 will always have your back. With the cabin you need for passengers and cargo, nothing and no one will get left behind.

ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

TMM-238 is developed and designed for use in operator display for Militray systems. It has 1920 x 1080 pixels visible resolution, which is designed and tailored for use in operator display for Militray systems • 23.8”Inch display, 16:9 / 1920 x 1080 Resolution • HDMI, DP, RGB, input • Full Range Digital Dimming Control • 6 Key Membrane Switch • Power range : DC 24V Input • LCD PANEL backlight unit : LCD Backlight units

1. Filler Metal Name Material/Alloy AWS W-No. ISO-No. Nickel 61 Ni A5.14 ERNi-1 2.4155 SiNi2061 MONEL® 60 Ni-Cu A5.14 ERNiCu-7 2.4377 SNi4060 MONEL® 67 Cu-Ni A5.7 ERCuNi 2.8037 SCu7158 INCONEL® 72 Ni-Cr A5.14 ERNiCr-4 SNi6071 NC 80/20 Ni-Cr 2.4639 INCONEL® 82 Ni-Cr A5.14 ERNiCr-3 2.4806 SNi6082 INCONEL® 622 Ni-Cr-Mo A5.14 ERNiCrMo-10 SNi6022 INCONEL® 625 Ni-Cr-Mo A5.14 ERNiCrMo-3 2.4831 SNi6625 INCO-WELD® 686-CPT Ni-Cr-Mo A5.14 ERNiCrMo-14 SNi6686 INCO-WELD® 725NDUR Ni-Cr-Mo A5.14 ERNiCrMo-15 SNi7725 INCO-WELD® C-276 Ni-Cr-Mo A5.14 ERNiCrMo-4 2.4886 SNi6276 INCONEL® 52 Ni-Cr-Fe A5.14 ERNiCrFe-7 SNi6052 INCONEL® 52M Ni-Cr-Fe A5.14 ERNiCrFe-7A INCONEL® 92 Ni-Cr-Fe A5.14 ERNiCrFe-6 SNi7092 INCONEL® 617 Ni-Cr-Co-Mo A5.14 ERNiCrCoMo-1 2.4627 SNi6617 NILO® CF36 Ni-Fe INCOLOY® 65 Ni-Fe-Cr A5.14 ERNiFeCr-1 SNi8065 INCONEL® 718 Ni-Fe-Cr A5.14 ERNiFeCr-2 2.4667 SNi7718 Titanium Grade 1 Ti A5.16-90 ERTi-1 Titanium Grade 2 Ti A5.16-90 ERTi-2 Titanium Grade 5 Ti-Al-V A5.16-90 ERTi-5 Titanium Grade 7 Ti-Pd A5.16-90 ERTi-7 2. Electrodes Name Material/Alloy AWS W-No. ISO-No. Nickel 141 Ni A5.11 ENi-1 2.4156 ENi2061 MONEL® 190 Ni-Cu A5.11 ENiCu-7 2.4366 ENi4060 MONEL® 187 Cu-Ni A5.6 ECuNi 2.0838 ECu7158 INCO-WELD® A Ni-Cr-Fe A5.11 ENiCrFe-2 2.4805 ENi6092 INCONEL® 152 Ni-Cr-Fe A5.11 ENiCrFe-7 ENi6152 INCONEL® 182 Ni-Cr-Fe A5.11 ENiCrFe-3 2.4807 ENi6182 INCONEL® 112 Ni-Cr-Mo A5.11 ENiCrMo-3 2.4621 ENi6625 INCONEL® 122 Ni-Cr-Mo A5.11 ENiCrMo-10 ENi6022 INCO-WELD® C-276 Ni-Cr-Mo A5.11 ERNiCrMo-4 2.4887 ENi6276 INCO-WELD® 686CPT Ni-Cr-Mo A5.11 ERNiCrMo-14 ENi6686 INCONEL® 117 Ni-Cr-Co-Mo A5.11 ERNiCrCoMo-1 2.4628 ENi6617

Delivering dinner to your door. Bringing medical supplies to hospitals. Surveying waters where someone is missing. Drones are starting to help make many tasks faster and life a little easier. One hitch in using drones is that, in most cases, regulators in many countries require that a human keep them in sight at all times.

Hydraulics International, Inc. (HII), headquartered in Chatsworth, California, U.S.A., is a leading worldwide supplier of integrated products, services and support to military forces, aviation and commercial industries, Government agencies and prime contractors. Focused on defense and commercial technology, the Company develops, manufactures and supports a broad range of systems for over one hundred industries as well as mission-critical and military sustainment requirements over the globe. Our extensive design capabilities enable us to produce the most sophisticated technological units known in the Aircraft Ground Support Equipment (AGSE) profession.

HII has been recognized as one of the largest defense ground support equipment technology companies in the world. We hold leading market positions in ammunition loading systems, aircraft hydraulic system testing, aircraft cabin pressure testing, power systems, environmental control systems, military trailers, high-pressure gas and liquid systems, flow measuring equipment, and integrated logistics and support services.

Our corporate, engineering and manufacturing facilities, located in Chatsworth, CA and Forsyth, GA, encompass over 625,000 sq. feet of production space. Our manufacturing facility is equipped with state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, full sheet laser and waterjet, automatic press brake and programmable punch press, laser topography scanners, and other quality verification devices.

The unique contactless core of the Electric Encoder, featuring a “hollow shaft” design, minimizes axial space requirements and enhances reliability by eliminating degradation mechanisms. Key features include zero magnetic signature, immunity to EMI/RFI and magnetic fields, lightweight construction, low inertia, and a slim profile. Netzer Precision Position Sensors has evolved cutting-edge position sensing encoder technology, originally designed for demanding environments, into a versatile solution that meets the varied requirements of industries such as defense, homeland security, aerospace, and motion control instrumentation. Our range of standard and customized electric rotary encoders also serves applications in medical, automotive, and other diverse fields.

The EMC-102 EDECU is configured as a common supervisory engine control for both T700-GE-701C/D and T700- GE-401C applications. Slated for use by the Army on current fielded models of Black Hawk helicopters, the control is configured with modern electronics, allowing for a more reliable alternative to the present Black Hawk control. The control unit is also compatible with the AH-64 Apache. The control is qualified to the latest Army requirements for superior operability in adverse environments.