- Dimensions (L x W x H): 40 x 90 x 35 mm (receiver + antenna array) - Weight: 120g (receiver + antenna array) - Power Consumption: 3W - Constellations: GPS, Galileo, GLONASS, BeiDou, NavIC - Frequencies: L1/L5 or L1/L2 - Interference Resistance: Single jammer up to 90 dB (J/S)

The operation of robotic inspection systems in an industrial environment requires a reliable control station. The second generation integrated control station -ICS 2- gives operators an all-in-one tool. Supplied in a rugged hardshell case (Pelicase®), embedded components such as a 21.5-inch touchscreen, high-performance PC or joystick can be selected according to industry standards. It also boasts a 10-year spare parts guarantee as well as extreme robustness and reliability even in harsh environments. Simplicity and ease of operation were key when developing ICS 2. The operator connects the robotic platform with one single cable and using the integrated joystick, operation is simple and self-explanatory.

From briefing to touchdown and beyond, Fpo gives crews fully actionable recommendations on the most cost-efficient way to complete their flights under the current conditions, carefully balancing operational considerations with passenger comfort and on-time performance. Fpo holistically optimizes all phases of flight from climb to descent, relying on high-fidelity and real-time data to deliver information that is accurate, relevant and complete. Always raising the bar, we have partnered with Nexteon Technologies to introduce a multi-dimensional optimization solution, FPO•SR, which combines vertical and lateral flight optimization capabilities.

24-7 non-stop operating RADAR for ceaseless aerial surveillance and early trajectory detection. Design and Manufacture - Antenna Housing - Driving Unit

- Urban drones specialized in surveillance/spatial information/disaster safety/facility survey - Completed localization of core components! Equipped with encryption KCMVP Dimensions (WxLxH) : Flight / 360x360x160mm(h) Folding / 260x260x160mm(h) Airframe Weight : 2kg or less (max take-off weight) GNSS : RTK / GNSS (SBAS supported) Flight Time : 30 minutes

From design to manufacturing and follow-up support, Huneed Technologies provides safe, reliable, and cost-effective mission-critical wireless communications systems for the military. We provide a diverse portfolio of communications equipment to the Korean military and can work with international governments to meet or exceed their demanding requirements.

A-29 SUPER TUCANO

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.