- Minimizing the station's door opening and closing time to support drones' quick entry and exit. - Structural design to minimize noise and vibration when opening and closing the door - Design and implementation of an interface for interaction between an automatic door system and a drone. - Automatically opening and closing door system - Automatic detection of drones through cameras and sensors, and safe storage and charging functions

The X-band LNB is a satellite ground transport terminal that includes a transmission rejection filter and performs downconversion of X-band signals to IF using an internal reference frequency. It features dustproof, moisture-proof, and waterproof protection, along with self-diagnostic functions such as a lock alarm. The unit provides a total gain of over 60 dB and supports a wide bandwidth of 500 MHz. Its frequency stability is maintained within 0.31 ppm.

Hermetic connectors are a special class of sealed Mil /Aero interconnect that incorporates glass-to-metal or other highly-engineered sealing technology. Hermetic seal connectors are specified for applications as divergent as submarines and orbiting satellites. They are deployed to resist moisture ingress in underground applications and to withstand pressure differentials in vacuum chambers, laboratory equipment and commercial and military aircraft. Hermetic seal connectors, such as the MIL-DTL-38999 Series I, II, III and IV supplied by Glenair, are principally designed for use in military aerospace — in fact, the sealing requirement for connector hermeticity was originally driven by military electronic applications. But the products are equally at home in commercial applications such as oil-patch, logging equipment or medical devices.

A VGA (640×480) LWIR (8–12 µm) uncooled micro-bolometer module with 12 µm pixel pitch and NETD ≤ 50 mK, paired with an F1.0, 10.7 mm EFL lens delivering H42° / V31.5° / D52.5° FOV. It streams at 30 Hz in either UVC (USB-C, 5 V) or GMSL1 (FAKRA, 12 V), with power consumption < 1.9 W. The compact, lightweight housing (30×30×58.9 mm for UVC; 30×30×70.9 mm with FAKRA for GMSL1; IP65; −40 °C to 85 °C) makes it well-suited for autonomous vehicles, UAVs, and security systems, providing reliable day/night thermal perception of pedestrians, animals, and objects in adverse weather.

EveryDrone is a web-based tool for developing high-performance drones. It enables 3D model creation, virtual wind tunnel testing(CFD), and structural analysis, all without software installation. Even without prior simulation knowledge, anyone can follow the workflow to easily complete simulations.

The CAS-500(Compact Advanced Satellite), phase #1 project is the project in which KAI aims to develop a CAS500-1 by operating a joint design team with Korea Aerospace Research Institute(KARI) and to transfer the government’s satellite development technology to the industries. Then, KAI initiates the development of the CAS500-2 project and establish the industry-led development as well as mass-production infrastructure.

The mRO-50 Ruggedized is a breakthrough microwave optical double resonance (MODR) low SWaP-C Miniaturized Rubidium Oscillator designed to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one day holdover below 1µs and a retrace below 1E-10 in a form factor (50.8 x 50.8 x 20mm) that takes up only 51 cc of volume (about one-third of the volume compared to standard rubidiums) and consumes only 0.36W of power, which is about ten times less than existing solutions with similar capabilities. The mRO-50 Ruggedized Oscillator provides accurate frequency and precise time synchronization to mobile applications, such as military radio-pack systems in GNSS-degraded or denied environments. Its wide-ranging operating temperature of -40° to +80°C is also ideal for: Underwater Applications, Military Communications, Radars, Low Earth Orbit, Electronic Warfare, Airbornes & Avionics, UAV/UGV/USV/UUV

Type : Axial (3P) Size(Ø, mm) : 310 × 109 Weight(kg) : 37 N. Speed(rpm) : 2100 N. Torque(Nm) : 450 N. Power(kW) : 100