It is an UAV recovery system that lands a fixed-wing UAV even in mountainous terrain where there is no sufficient runway for landing. Similar to the arresting hook method used to land an aircraft on an aircraft carrier, the UAV is caught by a pendant and braked, and a net is also added in case of an emergency.

This unit(SOU) supplies sealing oil to prevent mixing of hydraulic oil and liquefied methanol gas inside of FBIV(Fuel Booster Injection Valve) when the main engine operates. SOU is divided into large bore main engine(60 bore over) and small bore main engine(50 bore below) type by the number of membrane accumulator. The main components consist of an oil tank, an electric motor, a hydraulic gear pump, an oil filter, a control block, accumulators, and various senses, transmitters and indicators.

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

Supports non-destructive inspection of aircraft composite skin structures and is composed of a piezoelectric layer sensor, data acquisition equipment, and damage analysis software. Utilizes piezoelectric sensors to generate Lamb-wave and acquire signals, collecting data to accurately detect and assess composite damage. Visualizes inspection results on display such as damage location, size and index. - POD Accuracy: 1 inch 90% or more - POD Precision : Position error within 30 mm - 64 channels / 230 path reference detection time within 10 minutes - Sensor : Resonance resistance less than 400kΩ - Sensor : MIL-STD-810G - Sensor : RTCA DO-160 Section 23.0 - DAQ : x128 Piezoelectric sensor interface

All units are equipped with a microprocessor-based MPCU controller that manages diagnostics, protection, and optional energy consumption monitoring systems. EAR rectifiers are trusted across ground support zones, hangars, and field operations.

Using the dedicated TYTO2 messenger app, you can pair it with your smartphone and conveniently send and receive messages in standard format or with AES256 encryption, With a built-in battery and both satellite and GPS antennas, the device is ruggedized for use in extreme environments. SOS button is designed for immediate emergency/alert notifications.

Rolatube IAM (Integrated Antenna Mast) is a lightweight, man-portable communications mast that integrates a high-efficiency dipole antenna directly into its structure—redefining rapid tactical deployment. Built from Rolatube’s proprietary bistable composite, the IAM unrolls to full height without tools, enabling users to connect and transmit in seconds. Available in 3.5 m and 7 m models, the mast weighs just 1.9 kg and packs down to a 150 mm roll, offering unmatched portability for dismounted operations. Designed for reliable RF performance, the IAM ensures no signal loss when in contact with grounded surfaces. Its embedded omni-directional dipole antenna delivers superior range and VOR communication performance compared to traditional systems. The 3.5 m IAM comes in VHF (30–300 MHz) and UHF (136–470 MHz) variants, each available in four colours, with a top-cap socket for L-Band antenna integration, extending the system’s use to applications such as telemetry, GPS, and aircraft surveillance. The mast can be handheld, guyed, or elevated via an integrated rigging point, and is engineered to meet MIL-STD-810G, fully maintenance-free, and resistant to water, dust, and UV. With a wind rating of 100 km/h (62 mph) when guyed, the IAM stands up to demanding field environments while delivering high-performance, elevated communications infrastructure at the tactical edge.

Introducing the FoldIR 30-450mm f/3.4 continuous zoom lens with Ophir's innovative folded optical design, offering lightweight, compact design while maintaining long optical lengths and improved tolerance sensitivity. This design ensures exceptional performance even in challenging environments, addressing stabilization and athermalization issues. Its unique f/3.4 aperture guarantees superior image quality, surpassing larger aperture zoom lenses in diffraction limit MTF and IR signal collection. The lens features a built-in mechanical shutter for NUC control, enhancing image quality through Ophir's control system. Weighting under 2kg, offering an impressive detection range of over 20km, and a horizontal field-of-view of 26.9º (WFOV) and 1.7º (NFOV). This compact, lightweight, long-range, high-performance lens is the ultimate selection of for optical air-land-sea optical gimbals and payloads. Key features include: • Efficient folded optics design for min. volume use • Physical shutter for NUC • Designed for MWIR 10μm SXGA sensors • For air-sea-land gimbals and payloads • Weight <2kg • Detection range >20km • HFOV 26.9º WFOV/ 1.7º NFOV