The engine is suitable for MALE AUVs. Available in pusher and tractor configurations. Digital interface for control and monitoring. Stable operation at high altitudes and high temperatures. Ability to run at cold temperatures below -30°C without preheating.

R HUGHES' Ca-Zoom PTZ 140 is a Pan-Tilt Zoom Camera inspection equipment equipped with the Ca-Zoom® 6.2 system. This equipment is capable of a total of 432x zoom with 36x optical zoom and 12x digital zoom, increasing inspection efficiency. In addition, two high-performance 35W lights are installed in the light source to enable more smooth inspection. The inspection technology of the PTZ Camera Ca-Zoom® line of products makes them ideal for inspecting large areas that are difficult for humans to access, such as tanks, vessels, pipelines or nuclear power plants.

Sungjin Techwin’s military-grade switches are engineered for mission-critical performance in the most demanding aerospace and defense environments. Designed with superior durability, ergonomic precision, and NVIS compatibility, our switches are qualified to MIL-STD and DO-160 standards. They are deployed across leading global platforms such as F-35, KF-21, T-50, CH-47, and B-250. With proven reliability and over 20 years of production expertise, Sungjin Techwin continues to deliver innovative cockpit control solutions that meet the highest standards of safety and performance.

A REDCOM SVG system consists of one or more REDCOM Sigma® SVG-1200 units and a series of standard production General Dynamics Sectéra vIPer phones. Each REDCOM SVG-1200 can interface with up to 12 vIPer phones, which act as voice encryptors for TDM or VoIP voice networks. The encryptors allow any line, trunk, or conference port to conduct secure voice communications with any SCIP-capable device. If more than 12 secure talk paths are required, multiple SVG-1200 units may be networked together.

< Frequency Range > ● LB-400: 400 ~ 460MHz ● LB-900: 800~928MHz ● MB-1500: 1300~1500MHz ● MB-2400: 2400 ~ 2500MHz ● HB-5.2: 5150 ~ 5250MHz ● HB-5.8: 5725 ~ 5875MHz < TX path output Power (at antenna port) > ● Normal mode: 35dBm [min] ● On each antenna port 2x 35dBm ● Interference mode: 40dBm [min] < TX path maximum Input Power > ● +20 dBm < RX path Gain > ● 25dB typ. < RX path Noise figure > ● Low bands: 3dB max. ● High bands 3.5dB max. < RX path IIP3 > ● -10dBm typ. < RX IP1dB compression point > ● 15dBm typ. < Power Supply > ● +24V ± 1 Vdc

Industrial and police-use civilian night vision solution products

This Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. This UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS units will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC or DC output to the load. The use of lithium ion batteries permits the lowest profile and lowest weight solution in its power class. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M systems.

We are Hyundai Steel, a member of Hyundai Motor Group, developing advanced composite parts for aircraft and AAM, with a focus on both structural and exterior applications. Using our rapid press-forming process, we can manufacture high-quality components in under 30 minutes, enabling faster production cycles and reliable performance. We also bring prior experience in small-scale production of automotive composite parts, strengthening our expertise across industries. If you are seeking to enhance the productivity of your composite parts, please feel free to contact us anytime for collaboration.